EUVIMEDEUVIMED entdecken
Crossref

Grey-Fuzzy Based Optimisation of Machining Parameters in Turning of AA 7068/TiC MMCs

Syed Altaf Hussain, Sudhamadhuri K, Upendra Rajak, Abhishek Dasore

Pertanika Journal of Science and Technology · 30.10.2026 · 34 (5)

DOI: 10.47836/pjst.34.5.14 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Pertanika Journal of Science and Technology, online erschienen am 30.10.2026. Verfasst von Syed Altaf Hussain und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the growing applications of Metal Matrix Composites in several engineering fields, it is necessary to develop appropriate machining technology to process them efficiently. The turning process is generally used across all industries. In this research, an effort has been made to determine optimum values of process parameters for turning of AA7068/TiC metal matrix composites (MMCs) using the Grey Fuzzy Approach. The selected process parameters are the % weight of particle reinforcement, cutting speed, feed and depth of cut. Experiments have been designed according to CCD and conducted on an all-geared lathe machine with a carbide (K-30) cutting tool insert. The responses considered are cutting force, surface roughness and metal removal rate (MRR). To optimise the machining responses simultaneously, grey relational analysis combined with fuzzy logic is employed to determine the grey-fuzzy reasoning grade. The optimum combination of process parameters that generated the highest GFRG value (0.6083) was found to be a wt% reinforcement of 2%, a cutting speed of 50 m/min, a feed of 0.06 mm/rev, and a depth of cut of 0.2 mm. From the ANOVA, the wt% of TiC reinforcement was the only statistically significant linear factor at the 95% confidence level in the multi-response optimisation. Confirmation test under optimum conditions led to a reduction in cutting force by 4.00% from 129.45 N to 124.27 N, an improvement in surface roughness by 3.04% from 0.493 μm to 0.478 μm, and an increase in MRR by 5.99% from 136.37 mm³/s to 144.55 mm³/s.

Zitieren

APA

Hussain, S. A., K, S., Rajak, U., & Dasore, A. (2026). Grey-Fuzzy Based Optimisation of Machining Parameters in Turning of AA 7068/TiC MMCs. Pertanika Journal of Science and Technology, 34(5). https://doi.org/10.47836/pjst.34.5.14

Vancouver

Hussain SA, K S, Rajak U, Dasore A. Grey-Fuzzy Based Optimisation of Machining Parameters in Turning of AA 7068/TiC MMCs. Pertanika Journal of Science and Technology. 2026;34(5). doi:10.47836/pjst.34.5.14

BibTeX
@article{Hussain2026,
  author = {Hussain, Syed Altaf and K, Sudhamadhuri and Rajak, Upendra and Dasore, Abhishek},
  title = {Grey-Fuzzy Based Optimisation of Machining Parameters in Turning of AA 7068/TiC MMCs},
  journal = {Pertanika Journal of Science and Technology},
  year = {2026},
  volume = {34},
  number = {5},
  doi = {10.47836/pjst.34.5.14}
}
Kostenlos starten →