EUVIMEDEUVIMED entdecken
Crossref

Parametric Study of Reaction Parameter for Glycerol Acetylation and Reusability of Sulfated-Titania Catalyst

Shera Farisya Mohamad Rasid, Ernee Noryana Muhamad, Yun Hin Taufiq-Yap, Haizatul Izzatti Ridzuan, Ling Lee Siew, Irmawati Ramli

Pertanika Journal of Science and Technology · 20.08.2026 · 34 (4)

DOI: 10.47836/pjst.34.4.04 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Pertanika Journal of Science and Technology, online erschienen am 20.08.2026. Verfasst von Shera Farisya Mohamad Rasid und 5 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A parametric study of the reaction parameter for glycerol acetylation was conducted using a highly active sulfated-titania catalyst to determine the ideal conditions for achieving higher TA selectivity and glycerol conversion (GLC). The catalyst was prepared by impregnating titania with a 15% sulfuric acid solution, followed by calcination under CO2 for 2 hours and denoted as the 15SA catalyst. The catalyst was subsequently analysed using TGA, XRD, BET, XPS, NH3-TPD, and SEM-EDX. The characterisation results revealed that the 15SA catalyst possesses a sufficient surface area (1.9 m2g-1), a high density of acidic sites (342.6 μmolg−1) and good porosity. The study then examined the effects of several reaction parameters, including temperature (100 °C – 140 °C), molar ratio of glycerol (Gly) to acetic acid (Ac) (1:3 w/v – 1:15 w/v), catalyst loading (0.1 g – 0.9 g) and reaction time (1 h – 5 h). The catalyst was then reused for five successive cycles to evaluate its reusability. The results demonstrated that a higher density of acidic sites, sufficient BET surface area and pore volume of the catalyst may enhance the formation of GLC and TA in the glycerol acetylation by facilitating the diffusion of the glycerol molecules on the catalyst’s surface. Therefore, optimal conditions for glycerol acetylation yielded a higher TA selectivity of 55 % and glycerol conversion of 97 % at a molar ratio of 1:6 w/v of Gly: Ac and a catalyst loading of 0.5 g at 130 °C for a 2 h reaction time. The reusability study showed that the 15SA catalyst can attain a higher GLC exceeding 97 % and a higher DA+TA selectivity of 85 % after five cycles. In contrast, the selectivity of TA reduced after five cycles due to the leaching of the acidic site from the catalyst, as proven by the EDX analysis.

Zitieren

APA

Rasid, S. F. M., Muhamad, E. N., Taufiq-Yap, Y. H., Ridzuan, H. I., Siew, L. L., & Ramli, I. (2026). Parametric Study of Reaction Parameter for Glycerol Acetylation and Reusability of Sulfated-Titania Catalyst. Pertanika Journal of Science and Technology, 34(4). https://doi.org/10.47836/pjst.34.4.04

Vancouver

Rasid SFM, Muhamad EN, Taufiq-Yap YH, Ridzuan HI, Siew LL, Ramli I. Parametric Study of Reaction Parameter for Glycerol Acetylation and Reusability of Sulfated-Titania Catalyst. Pertanika Journal of Science and Technology. 2026;34(4). doi:10.47836/pjst.34.4.04

BibTeX
@article{Rasid2026,
  author = {Rasid, Shera Farisya Mohamad and Muhamad, Ernee Noryana and Taufiq-Yap, Yun Hin and Ridzuan, Haizatul Izzatti and Siew, Ling Lee and Ramli, Irmawati},
  title = {Parametric Study of Reaction Parameter for Glycerol Acetylation and Reusability of Sulfated-Titania Catalyst},
  journal = {Pertanika Journal of Science and Technology},
  year = {2026},
  volume = {34},
  number = {4},
  doi = {10.47836/pjst.34.4.04}
}
Kostenlos starten →