EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Collaborative robotic system for optimizing the execution of interior fit-out works: architecture, industrial quantification, and experimental validation

Vlad Petrut Ionescu, Andreea Dora Bianca Pironea, Laurentiu Rece

Technium: Romanian Journal of Applied Sciences and Technology · 27.06.2026 · 31 · 441-454

DOI: 10.47577/technium.v31i.13708 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Technium: Romanian Journal of Applied Sciences and Technology, online erschienen am 27.06.2026. Verfasst von Vlad Petrut Ionescu und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The interior fit-out sector generates between 30% and 40% of the total cost of a construction project, of which up to 30% is attributable to rework processes and to logistical inefficiencies caused by the variability of craft-based labour. This paper proposes and quantifies a Collaborative Robotic System (CRS) for the industrialization of finishing works, built around three principal technical components: (1) an omnidirectional mobile platform with Mecanum wheels and LiDAR navigation; (2) a 6-degree-of-freedom (6-DOF) manipulator arm; and (3) a closed-loop active rheological control algorithm of the PID type. The main contribution consists in a comparative quantitative analysis based on a life-cycle cost (LCC) model, validated through two case studies (a 3,000 m² corporate headquarters and a hospital ICU ward). The calculations demonstrate a 34.6% reduction in execution time, a direct material saving of 14.8%, the elimination of 96.3% of rework costs, and an investment payback period (IPP) of 9.3 months in the intermediate scenario. The return on investment (ROI) calculated over 10 years of operation is 218%, 2.7 times higher than the sector average. The results validate the potential of the CRS to structurally transform productivity and quality in the fit-out sector, with a direct impact on economic sustainability and occupational health.

Zitieren

APA

Ionescu, V. P., Pironea, A. D. B., & Rece, L. (2026). Collaborative robotic system for optimizing the execution of interior fit-out works: architecture, industrial quantification, and experimental validation. Technium: Romanian Journal of Applied Sciences and Technology, 31, 441-454. https://doi.org/10.47577/technium.v31i.13708

Vancouver

Ionescu VP, Pironea ADB, Rece L. Collaborative robotic system for optimizing the execution of interior fit-out works: architecture, industrial quantification, and experimental validation. Technium: Romanian Journal of Applied Sciences and Technology. 2026;31:441-454. doi:10.47577/technium.v31i.13708

BibTeX
@article{Ionescu2026,
  author = {Ionescu, Vlad Petrut and Pironea, Andreea Dora Bianca and Rece, Laurentiu},
  title = {Collaborative robotic system for optimizing the execution of interior fit-out works: architecture, industrial quantification, and experimental validation},
  journal = {Technium: Romanian Journal of Applied Sciences and Technology},
  year = {2026},
  volume = {31},
  pages = {441--454},
  doi = {10.47577/technium.v31i.13708}
}
Kostenlos starten →