Prediction of mild Steel weld properties using artificial neural network and regression analysis
Tropical Journal of Science and Technology · 10.03.2021 · 1 (2) · 37-49
DOI: 10.47524/tjst.v1i2.6 ↗Kurz gefasst
Fachartikel in der Zeitschrift Tropical Journal of Science and Technology, online erschienen am 10.03.2021. Verfasst von Jacob Achebo und 1 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref).
Abstract (Originalsprache)
Safety hazards resulting from structural material failure occur mostly in less developed countries where material standard specifications are not strictly adhered to, due to failure of government policy implementation. These hazards often result in loss of life. Failures tend to occur at welded joints, and various research institutions are making attempts to prevent such failures by developing new methods that could predict and improve welded joint qualities. The concern goes beyond safety, but also encompasses economic and other similar long term considerations. In this study, experimental methods were used to obtain the Bead Height (BH), Ultimate Tensile Strength (UTS) and Brinell Hardness Number (BHN) of mild steel welded joints. Thereafter, the artificial neural network (ANN), and Regression analysis methods were applied to predict the corresponding values of the BH, UTS, and BHN. The resulting performance of these two predictive methods was compared side by side to determine which one of the two methods better predicted these quality properties. This comparative analysis was carried out by comparing the percentage error of ANN to that of the Regression analysis. From the results obtained, it was found that for the bead height, Regression analysis method produced a total of 1.72% error. For UTS, ANN method produced a total of 63.31% error whereas Regression analysis produced a total of 0.39% and for BHN, ANN method produced a total of 353.86% error whereas, Regression analysis method produced a total of 2.58% error. The results shows that overall, regression analysis method predicted the properties better. Also, the effect of the process parameters on the weld properties were investigated. In this study, a step by step method is applied.
Zitieren
APA
Achebo, J., & Eki, M. (2021). Prediction of mild Steel weld properties using artificial neural network and regression analysis. Tropical Journal of Science and Technology, 1(2), 37-49. https://doi.org/10.47524/tjst.v1i2.6
Vancouver
Achebo J, Eki M. Prediction of mild Steel weld properties using artificial neural network and regression analysis. Tropical Journal of Science and Technology. 2021;1(2):37-49. doi:10.47524/tjst.v1i2.6
BibTeX
@article{Achebo2021,
author = {Achebo, Jacob and Eki, Martins},
title = {Prediction of mild Steel weld properties using artificial neural network and regression analysis},
journal = {Tropical Journal of Science and Technology},
year = {2021},
volume = {1},
number = {2},
pages = {37--49},
doi = {10.47524/tjst.v1i2.6}
}
EUVIMED