Computational analysis of blade tip-to-tower clearance effects on horizontal-axis tidal current turbine performance
Journal of Thermal Engineering · 23.06.2026
DOI: 10.47481/jten.0026 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Thermal Engineering, online erschienen am 23.06.2026. Verfasst von Majid Baseer und 6 weiteren Autor:innen.
Abstract (Originalsprache)
Early tidal turbine deployment is expected to occur in relatively shallow waters, where monopile support structures are widely adopted due to their structural simplicity, cost-effectiveness, and ease of installation. However, the influence of tip-to-tower clearance and symmetry boundary conditions on turbine performance and structural loading remains insufficiently understood. This study presents a combined analysis of the effects of tip-to-tower clearance and symmetry boundary conditions on the performance of a horizontal-axis tidal-current turbine (HATCT), using high-fidelity, transient computational fluid dynamics (CFD) simulations. Simulations were performed in ANSYS CFX by solving the Reynolds-Averaged Navier-Stokes (RANS) equations using the Shear Stress Transport (SST) turbulence model and a transient rotor–stator interface. Turbine performance is evaluated using two key coefficients: the coefficient of performance (Cp) and the coefficient of thrust (Ct). A tower diameter of 2 m was considered, with blade tip-to-tower clearances of 7 m, 5 m, 3 m, and 2 m. The corresponding mean cycle Cp values are 0.468, 0.476, 0.470, and 0.472, respectively, while Ct values remain largely unaffected, ranging between 0.86 and 0.87. Although average power shows minimal variation, power output fluctuates notably (approximately 3–4%) as clearance decreases. Additionally, substantial unsteady forces are generated on the tower, which may contribute to increased fatigue loading. The use of symmetry boundary conditions shows negligible impact on prediction accuracy while significantly reducing computational cost. These findings demonstrate that, when structural elasticity effects are accounted for, a blade tip-to-tower clearance approximately equal to the tower diameter is optimal for HATCT systems, providing practical design guidance for tidal turbine support structures.
Zitieren
APA
Baseer, M., Rehman, Z. U., Badshah, S., Badshah, M., Khan, M., Hussain, R., & Khan, R. (2026). Computational analysis of blade tip-to-tower clearance effects on horizontal-axis tidal current turbine performance. Journal of Thermal Engineering. https://doi.org/10.47481/jten.0026
Vancouver
Baseer M, Rehman ZU, Badshah S, Badshah M, Khan M, Hussain R, et al. Computational analysis of blade tip-to-tower clearance effects on horizontal-axis tidal current turbine performance. Journal of Thermal Engineering. 2026. doi:10.47481/jten.0026
BibTeX
@article{Baseer2026,
author = {Baseer, Majid and Rehman, Zia Ur and Badshah, Saeed and Badshah, Mujahid and Khan, Moddasir and Hussain, Riaz and Khan, Roohullah},
title = {Computational analysis of blade tip-to-tower clearance effects on horizontal-axis tidal current turbine performance},
journal = {Journal of Thermal Engineering},
year = {2026},
doi = {10.47481/jten.0026}
}
EUVIMED