EUVIMEDEUVIMED entdecken
Crossref

CFD-Based Calibration of Representative Elementary Units for Dry Pressure Drop in Structured Packings

Volkan Topaloğlu, Hakan Demir

Isı Bilimi ve Tekniği Dergisi · 01.05.2026 · 46 (1) · 167-175

DOI: 10.47480/isibted.1833958 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Isı Bilimi ve Tekniği Dergisi, online erschienen am 01.05.2026. Verfasst von Volkan Topaloğlu und 1 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Gefördert von: No external funding was received for this study..

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Representative Elementary Unit (REU) simplification has become a standard approach for CFD modeling of structured packings; however, its reliability in predicting dry pressure drop remains a critical yet underexplored issue. In particular, the sensitivity of hydraulic performance to internal geometric parameters is often overlooked in the current literature. This study addresses this gap by calibrating an REU model for Mellapak 500.Y against the semi-empirical correlation of Stichlmair et al. (1989) and experimental data from Tsai (2010). Single-phase simulations were conducted using the SST 𝑘−𝜔 turbulence model over a gas-load range of 0.72–4.32 Pa0.5. Grid independence was established at 0.53 million cells per REU. A domain-sensitivity analysis using one, four, and six REUs yielded deviations below 10%, confirming that a single-unit domain provides sufficient accuracy for dry-flow calibration. The results show that the nominal 2.00 mm sheet spacing leads to substantial underprediction of pressure drop, whereas an effective spacing of 0.24 mm brings the CFD predictions into agreement with Tsai’s measurements within a ±20% error band and consistent with the Stichlmair correlation across the operating window. These findings identify the effective sheet spacing as the dominant geometric calibration parameter and provide a reproducible, computationally efficient baseline REU for subsequent hydrodynamics simulations in Mellapak 500.Y.

Förderung

  • No external funding was received for this study.

Zitieren

APA

Topaloğlu, V., & Demir, H. (2026). CFD-Based Calibration of Representative Elementary Units for Dry Pressure Drop in Structured Packings. Isı Bilimi ve Tekniği Dergisi, 46(1), 167-175. https://doi.org/10.47480/isibted.1833958

Vancouver

Topaloğlu V, Demir H. CFD-Based Calibration of Representative Elementary Units for Dry Pressure Drop in Structured Packings. Isı Bilimi ve Tekniği Dergisi. 2026;46(1):167-175. doi:10.47480/isibted.1833958

BibTeX
@article{Topalolu2026,
  author = {Topaloğlu, Volkan and Demir, Hakan},
  title = {CFD-Based Calibration of Representative Elementary Units for Dry Pressure Drop in Structured Packings},
  journal = {Isı Bilimi ve Tekniği Dergisi},
  year = {2026},
  volume = {46},
  number = {1},
  pages = {167--175},
  doi = {10.47480/isibted.1833958}
}
Kostenlos starten →