EUVIMEDEUVIMED entdecken
Crossref

Experimental investigation of effects of nano-fluid usage on cooling in machining

Kemal Bilen, Hakan Zafer Kızılkaya, Abdulmecit Güldaş

Isı Bilimi ve Tekniği Dergisi · 01.05.2026 · 46 (1) · 79-89

DOI: 10.47480/isibted.1757702 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Isı Bilimi ve Tekniği Dergisi, online erschienen am 01.05.2026. Verfasst von Kemal Bilen und 2 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Gefördert von: Turkish Aerospace Incorporation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Application of nano-fluids in machining processes is becoming increasingly common due to their enhanced thermo-physical characteristics. Previous studies indicate that adding nano-particles such as Al2O3, MWCNT, or TiO2 into base fluids improves properties like density, viscosity, and thermal conductivity. This experimental study investigates the impact of addition of these nano-particles at concentrations of 0.5%, 1%, and 1.5% into a boron oil–water mixture. The research was carried out in three main phases: Nano-fluid preparation, thermo-physical property evaluation, and machining experiments on Ti-6Al-4V alloy. The results showed that increasing the nano-particle concentration led to a consistent rise in fluid density at 24.5 °C. However, similar trends were not observed for dynamic viscosity and thermal conductivity, which began to decline beyond 1% concentration of nano-particles. This decrease was attributed to fluid instability issues like precipitation and sedimentation. Furthermore, the use of nano-fluids significantly marked down temperature at the tool–workpiece interface. For instance, a 0.5% concentration of MWCNT particles reduced this temperature by approximately 18%. On the other hand, higher concentrations resulted in increased interface temperatures and worsened surface roughness due to particle deposition. Specifically, the use of 0.5% MWCNT improved surface finish by around 25%. The study concluded that machining performance benefits from nano-fluids only when used at optimal concentrations, as excessive amounts of nano-particles degrades performance-a finding supported by SEM analyses of the cutting inserts.

Förderung

  • Turkish Aerospace Incorporation

Zitieren

APA

Bilen, K., Kızılkaya, H. Z., & Güldaş, A. (2026). Experimental investigation of effects of nano-fluid usage on cooling in machining. Isı Bilimi ve Tekniği Dergisi, 46(1), 79-89. https://doi.org/10.47480/isibted.1757702

Vancouver

Bilen K, Kızılkaya HZ, Güldaş A. Experimental investigation of effects of nano-fluid usage on cooling in machining. Isı Bilimi ve Tekniği Dergisi. 2026;46(1):79-89. doi:10.47480/isibted.1757702

BibTeX
@article{Bilen2026,
  author = {Bilen, Kemal and Kızılkaya, Hakan Zafer and Güldaş, Abdulmecit},
  title = {Experimental investigation of effects of nano-fluid usage on cooling in machining},
  journal = {Isı Bilimi ve Tekniği Dergisi},
  year = {2026},
  volume = {46},
  number = {1},
  pages = {79--89},
  doi = {10.47480/isibted.1757702}
}
Kostenlos starten →