ANALISIS DIMENSI PROPULSI TERHADAP DAYA DORONG KAPAL PADA KECEPATAN PUTARAN MESIN INDUK
ILTEK : Jurnal Teknologi · 30.10.2026 · 21 (02) · 476-480
DOI: 10.47398/e0dtz486 ↗Kurz gefasst
Fachartikel in der Zeitschrift ILTEK : Jurnal Teknologi, online erschienen am 30.10.2026. Verfasst von Parawansa und 2 weiteren Autor:innen. Die Arbeit nennt 11 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
The propulsion performance of a ship is strongly influenced by the compatibility between propeller dimensions and the operating condition of the main engine, making it essential to understand how propulsion parameters affect performance in order to obtain an efficient propulsion system. This study aims to analyze the effect of variations in RPM, diameter, and propeller rake angle of a B-series propeller on the values of thrust, torque, and efficiency on MT. Sinar Srikandi, to determine the optimum parameter combination using the Taguchi method, and to identify the most dominant factor through ANOVA. The study examined eighteen parameter combinations consisting of two RPM levels (180 and 210), three diameter levels (1.5, 1.7, and 1.9 m), and three rake-angle levels (0°, 3°, and 6°); the data were then analyzed using the signal-to-noise ratio approach with a larger-is-better criterion and ANOVA. The results show that increasing RPM and diameter consistently increased thrust and torque, while increasing the rake angle had a greater effect on efficiency. The optimum combination based on the Taguchi method was obtained at 210 RPM, diameter 1.9 m, and rake 6°, producing the highest thrust of 9623.45 N and efficiency of 0.652. The ANOVA results indicate that RPM is the most dominant factor for thrust (91.69% contribution) and torque (75.48%), while rake is the most dominant factor for efficiency (68.12% contribution). A combination of high RPM, large diameter, and optimal rake angle is required to achieve the best propulsion performance.
Zitieren
APA
Parawansa, Rantererung, C. L., & Siahaya, Y. (2026). ANALISIS DIMENSI PROPULSI TERHADAP DAYA DORONG KAPAL PADA KECEPATAN PUTARAN MESIN INDUK. ILTEK : Jurnal Teknologi, 21(02), 476-480. https://doi.org/10.47398/e0dtz486
Vancouver
Parawansa, Rantererung CL, Siahaya Y. ANALISIS DIMENSI PROPULSI TERHADAP DAYA DORONG KAPAL PADA KECEPATAN PUTARAN MESIN INDUK. ILTEK : Jurnal Teknologi. 2026;21(02):476-480. doi:10.47398/e0dtz486
BibTeX
@article{Parawansa2026,
author = {Parawansa and Rantererung, Corvis L. and Siahaya, Yusuf},
title = {ANALISIS DIMENSI PROPULSI TERHADAP DAYA DORONG KAPAL PADA KECEPATAN PUTARAN MESIN INDUK},
journal = {ILTEK : Jurnal Teknologi},
year = {2026},
volume = {21},
number = {02},
pages = {476--480},
doi = {10.47398/e0dtz486}
}
EUVIMED