Analisa Kegagalan Material Kepala Silinder Mesin Diesel 4 TAK
Jurnal Sains dan Teknologi (JSIT) · 2021
DOI: 10.47233/jsit.v1i2.105 ↗Kurz gefasst
Fachartikel in der Zeitschrift Jurnal Sains dan Teknologi (JSIT), 2021. Verfasst von Lilin Hermawati und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
cylinder head is a part that is exposed to thermal and mechanical loads which not only affect engine performance parameters. The purpose of this study is to analyze the failure of the cylinder head structure of a 4 stroke diesel engine and find the cause of the failure. In this study, surveys and measurements of the cylinder head were carried out, to find out the appropriate results so that they could determine cracks, wear, and warping of the cylinder head. The results showed that the maximum bend on the side of the cylinder head attached to the cylinder block was 0.07 mm, 0.08 mm, 0.069mm. While the maximum bending on the side of the cylinder head attached to the manifold is 0.15 mm, 0.14 mm, 0.16 mm. At maximum bending on the side of the cylinder head attached to the exhaust manifold, it is necessary to pay attention to how to use the diesel engine correctly and according to operating hours.
Zitieren
APA
Hermawati, L., Mujiarto, I., Pratomo, S. A., & Kundori, K. (2021). Analisa Kegagalan Material Kepala Silinder Mesin Diesel 4 TAK. Jurnal Sains dan Teknologi (JSIT). https://doi.org/10.47233/jsit.v1i2.105
Vancouver
Hermawati L, Mujiarto I, Pratomo SA, Kundori K. Analisa Kegagalan Material Kepala Silinder Mesin Diesel 4 TAK. Jurnal Sains dan Teknologi (JSIT). 2021. doi:10.47233/jsit.v1i2.105
BibTeX
@article{Hermawati2021,
author = {Hermawati, Lilin and Mujiarto, Iman and Pratomo, Sunu Arsy and Kundori, Kundori},
title = {Analisa Kegagalan Material Kepala Silinder Mesin Diesel 4 TAK},
journal = {Jurnal Sains dan Teknologi (JSIT)},
year = {2021},
doi = {10.47233/jsit.v1i2.105}
}
EUVIMED