Bioengineered hydrogel-based scaffold for muscle regeneration
Extreme Medicine · 10.06.2026 · 28 (2) · 242-249
DOI: 10.47183/mes.2026-441 ↗Kurz gefasst
Fachartikel in der Zeitschrift Extreme Medicine, online erschienen am 10.06.2026. Verfasst von M. M. Bobrova und 8 weiteren Autor:innen. Die Arbeit nennt 46 Literaturangaben.
Abstract (Originalsprache)
Introduction
Injuries, tumor resections, and degenerative diseases can lead to extensive skeletal muscle defects, and consequently, to functional impairment and severe disability. Over the past few decades, various approaches to skeletal muscle tissue engineering have been developed. However, there remains a high demand for new effective methods and materials that promote functional regeneration, which could be used in the clinical treatment of muscle defects.
Objective
Development of a bioengineered polymer hydrogel-based scaffold for extensive skeletal muscle defects. Materials and methods. Bioengineered scaffold samples were obtained by hydrogel cryostructuring followed by lyophilization. The microstructure and morphology of the scaffold were analyzed using a Tescan VEGA III scanning electron microscope. The mechanical properties, tensile strength, and relative elongation were analyzed using an Instron ElectroPuls E3000 testing instrument. The cytotoxicity of the scaffold was studied using fluorescence microscopy on a culture of murine fibroblasts Balb/3T3 clone A31 and NCTC clone 929 culture. The statistical significance of differences was determined using a one-way analysis of variance (ANOVA) followed by the Holm–Šídák multiple comparison test, with the critical significance level α set at 0.05.
Results
A modified scaffold was developed, representing a layered construct based on a combination of natural polymers, collagen, and sodium hyaluronate, with the addition of crosslinking agents to form layers with varying resorption rates and proteolytic degradation profiles. The scaffold samples were found to possess a multilayered porous spongy structure. The сore layer (1.2 ± 0.1 mm thick) exhibited high — uniform and interconnected — porosity with nearly spherical pores ranging from 100–150 µm in size and a polymer framework wall thickness of less than 5 µm. The outer layer (300–500 µm thick) had a denser, lamellar structure with a polymer framework wall thickness of less than 2 µm and slit-shaped pores up to 200 µm in length and 50 µm in width. Compared to the core layer, significantly lower pore interconnectivity was observed, a channel structure was virtually absent, and pores were mostly isolated from one another by polymer walls. Tensile strength was 50 ± 0.5 kPa, and relative elongation was 26 ± 6%. Sterilization had no effect on the strength and elongation parameters. The absence of a cytotoxic effect of the obtained construct was demonstrated: no statistically significant differences in the number of dead cells compared to the control were detected at any of the observation time points (24 and 96 h).
Conclusions
Scaffold samples with a porous structure were obtained using a combination of layer-by-layer casting/molding methods with stepwise freezing and structure control, followed by lyophilization. For the developed construct, an ethylene oxide sterilization protocol was established. The sterilization process was found to have no effect on the strength and elongation parameters. The developed methods for obtaining biocompatible constructs based on polymer hydrogels and their modification techniques will make it possible to obtain devices with a high degree of biocompatibility for enhanced tissue regeneration.
Zitieren
APA
Bobrova, M. M., Luss, А. L., Kulikov, P. P., Fadeeva, I. S., Senotov, А. S., Minaychev, V. V., Teterina, A. Y., Kobyakova, М. I., & Keskinov, А. А. (2026). Bioengineered hydrogel-based scaffold for muscle regeneration. Extreme Medicine, 28(2), 242-249. https://doi.org/10.47183/mes.2026-441
Vancouver
Bobrova MM, Luss АL, Kulikov PP, Fadeeva IS, Senotov АS, Minaychev VV, et al. Bioengineered hydrogel-based scaffold for muscle regeneration. Extreme Medicine. 2026;28(2):242-249. doi:10.47183/mes.2026-441
BibTeX
@article{Bobrova2026,
author = {Bobrova, M. M. and Luss, А. L. and Kulikov, P. P. and Fadeeva, I. S. and Senotov, А. S. and Minaychev, V. V. and Teterina, A. Yu. and Kobyakova, М. I. and Keskinov, А. А.},
title = {Bioengineered hydrogel-based scaffold for muscle regeneration},
journal = {Extreme Medicine},
year = {2026},
volume = {28},
number = {2},
pages = {242--249},
doi = {10.47183/mes.2026-441}
}
EUVIMED