Optimization of Trapezoidal Bottom Sills for Flow Pattern Control in Integrated Diversion Gate–pumping Station Hubs
Journal of Applied Fluid Mechanics · 01.01.2027 · 20 (1)
DOI: 10.47176/jafm.20.1.4699 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Applied Fluid Mechanics, online erschienen am 01.01.2027. Verfasst von Y. Wang und 4 weiteren Autor:innen.
Abstract (Originalsprache)
This study investigates the system-level flow-control effect of trapezoidal bottom sills in an integrated diversion gate–pumping station hub. The relative sill height (h/H, where h is the sill height and H is the design water depth), relative streamwise placement (d/D, where d is the sill placement distance and D is the diffuser-section length), and sill width ratio (b/h, where b is the sill width) were selected as the design variables. A three-factor, five-level full-factorial computational-fluid-dynamics (CFD) experimental design was combined with entropy-weighted multi-indicator evaluation, recirculation-volume-ratio constraints, response surface methodology (RSM), engineering rounding, and CFD verification. The evaluation framework jointly considered velocity uniformity, flow-direction consistency, recirculation, and vortex intensity along the diversion basin–forebay–pump sump flow path. An entropy-weighted optimal parameter combination was first identified within the investigated design space and then rounded to an implementable engineering design with h/H = 0.35, d/D = 0.86, and b/h = 0.35. For this selected rounded design, the relative deviation between the RSM-predicted comprehensive objective value and the corresponding CFD-based value was 6.86%. Compared with the original scheme, the selected design increased forebay velocity uniformity by 28.22%, reduced the forebay recirculation area ratio by 90.25%, and improved the velocity-weighted mean flow angles at the forebay and pump sump inlet sections by 4.85% and 20.46%, respectively. The comprehensive vorticity indicators at the two evaluated sections decreased by 20.11% and 48.91%. The recirculation-volume ratios in the diversion basin and the C-direction gate approach channel–forebay–pump sump system decreased by 50% and 4.87%, respectively. Although the local hydraulic loss coefficient of the diversion basin increased from 7.948 to 21.790, the hydraulic efficiency of the pumping-station section changed only slightly from 96.4% to 96.3%, indicating that the selected design did not cause a substantial pumping-station efficiency penalty. Local RSM-based screening further identified the recirculation volume ratio in the C-direction gate approach channel–forebay–pump sump system as the governing feasibility constraint and showed that increasing d/D narrows the feasible neighborhood. The proposed framework provides a quantitative basis for selecting implementable trapezoidal bottom-sill geometries for hydraulic rectification in similar integrated diversion gate–pumping station hubs.
Zitieren
APA
Wang, Y., Yu, X., Qin, H., Chen, J., & Xu, F. (2027). Optimization of Trapezoidal Bottom Sills for Flow Pattern Control in Integrated Diversion Gate–pumping Station Hubs. Journal of Applied Fluid Mechanics, 20(1). https://doi.org/10.47176/jafm.20.1.4699
Vancouver
Wang Y, Yu X, Qin H, Chen J, Xu F. Optimization of Trapezoidal Bottom Sills for Flow Pattern Control in Integrated Diversion Gate–pumping Station Hubs. Journal of Applied Fluid Mechanics. 2027;20(1). doi:10.47176/jafm.20.1.4699
BibTeX
@article{Wang2027,
author = {Wang, Y. and Yu, X. and Qin, H. and Chen, J. and Xu, F.},
title = {Optimization of Trapezoidal Bottom Sills for Flow Pattern Control in Integrated Diversion Gate–pumping Station Hubs},
journal = {Journal of Applied Fluid Mechanics},
year = {2027},
volume = {20},
number = {1},
doi = {10.47176/jafm.20.1.4699}
}
EUVIMED