EUVIMEDEUVIMED entdecken
Crossref

Experimental and Numerical Investigation of a Dynamic Function Vehicle Tire Air Control Valve

Y. S. Korkmaz, A. Kibar, K. S. Yiğit, Z. Doğruyol

Journal of Applied Fluid Mechanics · 01.07.2026 · 19 (7)

DOI: 10.47176/jafm.19.7.4073 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Fluid Mechanics, online erschienen am 01.07.2026. Verfasst von Y. S. Korkmaz und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The Central Tire Inflation System (CTIS) is increasingly adopted in buses, trucks, and military vehicles, as it enables adaptive tire pressure control under varying terrain conditions, thereby improving vehicle performance and safety. In defense applications, the use of electronic components within tire systems is prohibited, which necessitates fully mechanical valve designs operating on alternative physical principles. This study presents an experimental and numerical investigation of a dynamic-function vehicle tire air control valve developed by Altan Hydraulic. Experimental results show that the original valve configuration cannot reliably remain open at low airflow rates (≤135 L/min). To overcome this limitation, a vacuum-assisted operating mechanism was investigated. Region A denotes the vacuum chamber, Region B the high-pressure chamber generating the opening force on the spool, and Region C the main flow passage. The nozzle tip inclination angle was modified from its original value of α = 90° in 10° increments over a range of 40°–180°, and the Ø0.2 mm orifice was repositioned to align with regions of maximum flow velocity, limiting the mass flow entering Region A. Flow dynamics and spool force balances were analyzed for Reynolds numbers between 33,874 and 112,913. The redesigned configuration generated a vacuum pressure of approximately −35 kPa in Region A at α = 120°, enabling the valve to remain open at tire pressures as low as 30 kPa. The results demonstrate that pressurized air from the tire can be used to generate a self-induced vacuum, ensuring sustained valve opening without electronic components. The proposed fully mechanical design significantly enhances CTIS performance by providing a reliable and energy-efficient solution for military and off-road vehicles.

Zitieren

APA

Korkmaz, Y. S., Kibar, A., Yiğit, K. S., & Doğruyol, Z. (2026). Experimental and Numerical Investigation of a Dynamic Function Vehicle Tire Air Control Valve. Journal of Applied Fluid Mechanics, 19(7). https://doi.org/10.47176/jafm.19.7.4073

Vancouver

Korkmaz YS, Kibar A, Yiğit KS, Doğruyol Z. Experimental and Numerical Investigation of a Dynamic Function Vehicle Tire Air Control Valve. Journal of Applied Fluid Mechanics. 2026;19(7). doi:10.47176/jafm.19.7.4073

BibTeX
@article{Korkmaz2026,
  author = {Korkmaz, Y. S. and Kibar, A. and Yiğit, K. S. and Doğruyol, Z.},
  title = {Experimental and Numerical Investigation of a Dynamic Function Vehicle Tire Air Control Valve},
  journal = {Journal of Applied Fluid Mechanics},
  year = {2026},
  volume = {19},
  number = {7},
  doi = {10.47176/jafm.19.7.4073}
}
Kostenlos starten →