EUVIMEDEUVIMED entdecken
Crossref

Numerical Investigation of Single Air Flow by Convergent-angle Injection of Airblast Atomizer

P. Yongyingsakthavorn, K. Yasamorn

Journal of Applied Fluid Mechanics · 01.06.2026 · 19 (6)

DOI: 10.47176/jafm.19.6.3929 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Fluid Mechanics, online erschienen am 01.06.2026. Verfasst von P. Yongyingsakthavorn und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research is a part of an airblast atomizer design project. The objective is to numerically investigate the single-phase air flow characteristics. The atomizer is designed to inject liquid as a sheet. The sheet is perpendicularly impacted by the atomizing air just after the outlet for maximum shear. The atomizing air is injected through a convergent-conical, hollow-section injection port with eight swirlers. Computational Fluid Dynamics (CFD) simulations are performed by using the finite volume method (FVM). First, a CFD protocol is established by testing the effects of mesh resolution and boundary conditions. The SST k-w turbulent model is selected. The simulation is validated by an experiment and the results show good agreement. The negligible effects of the injected-liquid spray on the atomizing-air flow are demonstrated by comparing the velocity profiles of the airflow with and without liquid injection. In this work, the flow characteristics of the atomizing air injected from different air-injection port diameters (Do), ranging between 14 - 18 mm, are investigated. All designed atomizers show a brief initial increase of velocity before a gradual decrease along the downstream distance. This initial acceleration results from the designed air-injection port with a convergent angle, which effectively promotes both swirling and penetration of the flow. A reduction of the Do leads to an increase of the airflow velocity, resulting in the greater air entrainment, the better flow penetration, and the higher level of turbulence.

Zitieren

APA

Yongyingsakthavorn, P., & Yasamorn, K. (2026). Numerical Investigation of Single Air Flow by Convergent-angle Injection of Airblast Atomizer. Journal of Applied Fluid Mechanics, 19(6). https://doi.org/10.47176/jafm.19.6.3929

Vancouver

Yongyingsakthavorn P, Yasamorn K. Numerical Investigation of Single Air Flow by Convergent-angle Injection of Airblast Atomizer. Journal of Applied Fluid Mechanics. 2026;19(6). doi:10.47176/jafm.19.6.3929

BibTeX
@article{Yongyingsakthavorn2026,
  author = {Yongyingsakthavorn, P. and Yasamorn, K.},
  title = {Numerical Investigation of Single Air Flow by Convergent-angle Injection of Airblast Atomizer},
  journal = {Journal of Applied Fluid Mechanics},
  year = {2026},
  volume = {19},
  number = {6},
  doi = {10.47176/jafm.19.6.3929}
}
Kostenlos starten →