EUVIMEDEUVIMED entdecken
Crossref

Performance Optimization of a Supercritical Carbon Dioxide Centrifugal Compressor with Nonuniform tip Clearance Based on the NSGA-III Optimization Algorithm

Z. Shen, L. Liu, W. Lin, J. Wu, S. Miao, X. Du

Journal of Applied Fluid Mechanics · 01.05.2026 · 19 (5)

DOI: 10.47176/jafm.19.5.4029 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Fluid Mechanics, online erschienen am 01.05.2026. Verfasst von Z. Shen und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work focused on the influence of nonuniform tip clearance on the performance characteristics of supercritical CO₂(SCO2) compressors. A parametric model of the nonuniform clearance at the impeller blade tip was constructed using Bézier curves. This study examined the impact of the nonuniform blade-tip clearance on the compressor’s aerodynamic performance. An automated closed-loop multi-objective optimization process based on TUI control was implemented using the nondominated sorting genetic algorithm III (NSGA-III). The geometric parameters of the nonuniform clearance corresponding to optimal performance were obtained. The performance and flow-field characteristics of the model under both optimal and baseline conditions were then compared and analyzed. The results show that the performance of the supercritical CO₂ compressor with nonuniform blade tip clearance was significantly improved. Under the design conditions, the efficiency increased by 3.08%, the pressure ratio increased by 1.55%, and the turbulent kinetic energy on the impeller’s S1 flow surface decreased by 29.3%. High-entropy production areas in the impeller and diffuser channels were significantly reduced, with entropy production rates decreasing by 37.1% and 53.4%, respectively. Unsteady flow-field analysis results show that pressure pulsations at the diffuser outlet decreased by 18.4%. Compared with traditional optimization methods, the approach proposed here greatly improves computational efficiency and has important implications for the aerodynamic performance optimization of supercritical CO₂ compressors.

Zitieren

APA

Shen, Z., Liu, L., Lin, W., Wu, J., Miao, S., & Du, X. (2026). Performance Optimization of a Supercritical Carbon Dioxide Centrifugal Compressor with Nonuniform tip Clearance Based on the NSGA-III Optimization Algorithm. Journal of Applied Fluid Mechanics, 19(5). https://doi.org/10.47176/jafm.19.5.4029

Vancouver

Shen Z, Liu L, Lin W, Wu J, Miao S, Du X. Performance Optimization of a Supercritical Carbon Dioxide Centrifugal Compressor with Nonuniform tip Clearance Based on the NSGA-III Optimization Algorithm. Journal of Applied Fluid Mechanics. 2026;19(5). doi:10.47176/jafm.19.5.4029

BibTeX
@article{Shen2026,
  author = {Shen, Z. and Liu, L. and Lin, W. and Wu, J. and Miao, S. and Du, X.},
  title = {Performance Optimization of a Supercritical Carbon Dioxide Centrifugal Compressor with Nonuniform tip Clearance Based on the NSGA-III Optimization Algorithm},
  journal = {Journal of Applied Fluid Mechanics},
  year = {2026},
  volume = {19},
  number = {5},
  doi = {10.47176/jafm.19.5.4029}
}
Kostenlos starten →