EUVIMEDEUVIMED entdecken
Crossref

Taguchi-based Optimization of Flanged Convergent-convergent Duct for Improving Micro Horizontal-axis Wind Turbine Performance

K. Ouyang, T. Y. Chen, W. H. Chen

Journal of Applied Fluid Mechanics · 01.10.2026 · 19 (10)

DOI: 10.47176/jafm.19.10.4379 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Fluid Mechanics, online erschienen am 01.10.2026. Verfasst von K. Ouyang und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A numerical optimization study was performed to determine an improved flanged converging–diverging duct geometry for enhancing the power performance of a micro horizontal-axis wind turbine (HAWT). The Taguchi method was employed for optimization. Five duct geometric parameters were considered control factors in the Taguchi method: the nozzle length, the nozzle angle, the diffuser angle, the flange length, and the flange angle. The optimization target was defined as the maximum rotor power coefficient (CP,max). Analysis of the Taguchi results revealed that the flange length exerted the most significant influence on CP,max among the investigated parameters. The optimum duct configuration achieved CP,max = 0.77 at 10 m/s and 0.76 at 16 m/s, respectively, representing increases of 48.4% and 71.4% compared with those of the worst duct configuration. In addition, the optimized duct accelerated the throat airflow velocity by 67.2% at 10 m/s and 65.5% at 16 m/s. With regard to the convergent nozzle in the duct, flow field analysis indicated that a smaller nozzle length and larger nozzle angle are favorable for accelerating the airflow. In addition, a longer flange with a flatter angle facilitates faster airflow movement through the wind turbine.

Zitieren

APA

Ouyang, K., Chen, T. Y., & Chen, W. H. (2026). Taguchi-based Optimization of Flanged Convergent-convergent Duct for Improving Micro Horizontal-axis Wind Turbine Performance. Journal of Applied Fluid Mechanics, 19(10). https://doi.org/10.47176/jafm.19.10.4379

Vancouver

Ouyang K, Chen TY, Chen WH. Taguchi-based Optimization of Flanged Convergent-convergent Duct for Improving Micro Horizontal-axis Wind Turbine Performance. Journal of Applied Fluid Mechanics. 2026;19(10). doi:10.47176/jafm.19.10.4379

BibTeX
@article{Ouyang2026,
  author = {Ouyang, K. and Chen, T. Y. and Chen, W. H.},
  title = {Taguchi-based Optimization of Flanged Convergent-convergent Duct for Improving Micro Horizontal-axis Wind Turbine Performance},
  journal = {Journal of Applied Fluid Mechanics},
  year = {2026},
  volume = {19},
  number = {10},
  doi = {10.47176/jafm.19.10.4379}
}
Kostenlos starten →