EUVIMEDEUVIMED entdecken
Crossref

Influence of Structural Parameters on Airflow Uniformity and Optimisation of a Tower-type Air-assisted Sprayer Based on Computational Fluid Dynamics

P. Y. Zhan, Z. Y. Sun, Q. C. Meng, H. Y. Tong, Z. X. Wang, J. A. Qiao, X. W. Bai

Journal of Applied Fluid Mechanics · 01.10.2026 · 19 (10)

DOI: 10.47176/jafm.19.10.4360 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Fluid Mechanics, online erschienen am 01.10.2026. Verfasst von P. Y. Zhan und 6 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In air-assisted orchard spraying, airflow characteristics strongly determine spray performance. This study designed a tower-shaped fan for grape canopies and investigated its aerodynamic behaviour. A three-dimensional computational fluid dynamics (CFD) model of the internal flow field was established to quantify the effects of shroud taper, upper and lower guide-vane angles, inlet diameter, and inlet position on outlet air-velocity uniformity. Single-factor simulations confirmed that all selected structural parameters significantly affect the outlet air velocity’s coefficient of variation (CV). Based on these results, central composite design was applied for multi-parameter optimisation. A second-order regression model was developed to describe the relationship between guide-vane angles, shroud taper, inlet position, inlet diameter, and air-velocity CV response. Analysis of variance showed that the influence of the factors decreased in the following order: guide-vane angle > inlet position > inlet diameter > shroud taper. Numerical optimisation identified the optimal configuration as a guide-vane angle of 118.37°, shroud taper of 23.84°, inlet position of 29.35 mm, and inlet diameter of 493.92 mm. Under these conditions, the predicted air-velocity CV decreased to 12.07%. A field validation experiment was conducted using representative measurement points selected from the simulated velocity distribution. The maximum relative error between measured and simulated values was below 6%, indicating strong agreement. These results confirm the reliability of the CFD model and demonstrate its effectiveness for structural optimisation of orchard air-assisted spraying equipment.

Zitieren

APA

Zhan, P. Y., Sun, Z. Y., Meng, Q. C., Tong, H. Y., Wang, Z. X., Qiao, J. A., & Bai, X. W. (2026). Influence of Structural Parameters on Airflow Uniformity and Optimisation of a Tower-type Air-assisted Sprayer Based on Computational Fluid Dynamics. Journal of Applied Fluid Mechanics, 19(10). https://doi.org/10.47176/jafm.19.10.4360

Vancouver

Zhan PY, Sun ZY, Meng QC, Tong HY, Wang ZX, Qiao JA, et al. Influence of Structural Parameters on Airflow Uniformity and Optimisation of a Tower-type Air-assisted Sprayer Based on Computational Fluid Dynamics. Journal of Applied Fluid Mechanics. 2026;19(10). doi:10.47176/jafm.19.10.4360

BibTeX
@article{Zhan2026,
  author = {Zhan, P. Y. and Sun, Z. Y. and Meng, Q. C. and Tong, H. Y. and Wang, Z. X. and Qiao, J. A. and Bai, X. W.},
  title = {Influence of Structural Parameters on Airflow Uniformity and Optimisation of a Tower-type Air-assisted Sprayer Based on Computational Fluid Dynamics},
  journal = {Journal of Applied Fluid Mechanics},
  year = {2026},
  volume = {19},
  number = {10},
  doi = {10.47176/jafm.19.10.4360}
}
Kostenlos starten →