Nonlinear Angular and Polarization-Dependent Reflectance Sensitivity in MAPbI₃ Thin-Film Structures: Thickness-Tuned TiO₂ Interlayer Effects
Physical Sciences, Life Science and Engineering · 30.12.2025 · 3 (1) · 12
DOI: 10.47134/pslse.v3i1.609 ↗Kurz gefasst
Fachartikel in der Zeitschrift Physical Sciences, Life Science and Engineering, online erschienen am 30.12.2025. Verfasst von Abdullah Lateef. Die Arbeit nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study presents a theoretical investigation of the angular and polarization-dependent reflectance sensitivity of MAPbI₃-based thin-film structures using the Transfer Matrix Method (TMM). Two configurations were considered: a single-layer structure and a bilayer structure incorporating a TiO₂ interlayer . The analysis was performed within the 300–800 nm spectral range under oblique incidence conditions. The results show that the reflectance sensitivity exhibits a clear nonlinear dependence on the angle of incidence. Under TE polarization, the sensitivity increases significantly with angle and reaches its maximum at 60°, indicating strong angular amplification driven by interference-induced phase modulation. In contrast, TM polarization demonstrates a gradual reduction in sensitivity, accompanied by a sign reversal at higher angles due to impedance matching effects near Brewster-related conditions. The introduction of a TiO₂ interlayer preserves the overall angular trend while enabling moderate structural tuning. Thickness optimization reveals polarization-dependent optimal values, with peak TE sensitivity obtained near 80 nm and peak TM sensitivity around 50 nm. However, quantitative comparison between single- and bilayer configurations confirms that angular control plays a more dominant role in sensitivity enhancement than thickness adjustment alone. Overall, the findings highlight the effectiveness of polarization-engineered angular modulation as a practical approach for enhancing reflectance-based sensing performance in perovskite multilayer systems, offering simplified design guidelines for angle-selective photonic coatings and optical sensors.
Zitieren
APA
Lateef, A. (2025). Nonlinear Angular and Polarization-Dependent Reflectance Sensitivity in MAPbI₃ Thin-Film Structures: Thickness-Tuned TiO₂ Interlayer Effects. Physical Sciences, Life Science and Engineering, 3(1), 12. https://doi.org/10.47134/pslse.v3i1.609
Vancouver
Lateef A. Nonlinear Angular and Polarization-Dependent Reflectance Sensitivity in MAPbI₃ Thin-Film Structures: Thickness-Tuned TiO₂ Interlayer Effects. Physical Sciences, Life Science and Engineering. 2025;3(1):12. doi:10.47134/pslse.v3i1.609
BibTeX
@article{Lateef2025,
author = {Lateef, Abdullah},
title = {Nonlinear Angular and Polarization-Dependent Reflectance Sensitivity in MAPbI₃ Thin-Film Structures: Thickness-Tuned TiO₂ Interlayer Effects},
journal = {Physical Sciences, Life Science and Engineering},
year = {2025},
volume = {3},
number = {1},
pages = {12},
doi = {10.47134/pslse.v3i1.609}
}
EUVIMED