EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Pengaruh Variasi Arus Pada Pengelasan SMAW Terhadap Uji Kekuatan Bending dan Struktur Micro Baja ST 42

Riki Alan Mabrullah, Kosjoko Kosjoko, Rohimatush Shofiyah

Journal of Engineering Science and Technology · 31.05.2024 · 2 (2) · 53-61

DOI: 10.47134/jesty.v2i2.24 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Engineering Science and Technology, online erschienen am 31.05.2024. Verfasst von Riki Alan Mabrullah und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research aims to analyze the effect of variations in welding current on the mechanical strength of ST 42 steel using the SMAW welding method and E6013 electrodes with a diameter of 3.2 mm. The variations in welding current used are 90A, 100A and 110A. The tensile test results show that a welding current of 110A produces the highest tensile test value with a yield point (YP) of 8,368 MPa, maximum stress (MAX) of 9,890 MPa, and break point (BREAK) of 5,283 MPa. Bending tests indicate that a welding current of 110A produces the highest bending strength of 10.118 MPa. Microstructural observations revealed that the highest percentage of pearlite was present in welding with a current of 110A, which contributed to an increase in the tensile strength of the material. From the results of this research, it can be concluded that the increase in welding current is directly proportional to the increase in the mechanical strength of ST 42 steel

Zitieren

APA

Mabrullah, R. A., Kosjoko, K., & Shofiyah, R. (2024). Pengaruh Variasi Arus Pada Pengelasan SMAW Terhadap Uji Kekuatan Bending dan Struktur Micro Baja ST 42. Journal of Engineering Science and Technology, 2(2), 53-61. https://doi.org/10.47134/jesty.v2i2.24

Vancouver

Mabrullah RA, Kosjoko K, Shofiyah R. Pengaruh Variasi Arus Pada Pengelasan SMAW Terhadap Uji Kekuatan Bending dan Struktur Micro Baja ST 42. Journal of Engineering Science and Technology. 2024;2(2):53-61. doi:10.47134/jesty.v2i2.24

BibTeX
@article{Mabrullah2024,
  author = {Mabrullah, Riki Alan and Kosjoko, Kosjoko and Shofiyah, Rohimatush},
  title = {Pengaruh Variasi Arus Pada Pengelasan SMAW Terhadap Uji Kekuatan Bending dan Struktur Micro Baja ST 42},
  journal = {Journal of Engineering Science and Technology},
  year = {2024},
  volume = {2},
  number = {2},
  pages = {53--61},
  doi = {10.47134/jesty.v2i2.24}
}
Kostenlos starten →