EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Study on ratio of cutting height to caving height for efficient top-coal recovery in extra thick and gently inclined coal seam – a case study of seam 7 Ha Lam coal mine, Vietnam

Duc Hung Pham, Tien Dung Le, Phi Hung Nguyen, Van Quan Pham

Journal of Sustainable Mining · 25.01.2025 · 24 (2) · 203-213

DOI: 10.46873/2300-3960.1445 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Sustainable Mining, online erschienen am 25.01.2025. Verfasst von Duc Hung Pham und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The mechanized longwall top-coal caving technology (LTCC) has been used in Quang Ninh underground coal mines owned by Vietnam National Coal – Mineral Industries Holding Corporation Limited (Vinacomin). The application of the LTCC technology has achieved significant achievements, contributing to the production of coal for national economy development. The use of LTCC has shown that the top-coal recovery efficiency is directly affected by the sequence of top coal drawing, ratio of cutting height to caving height, and caving span. These parameters, especially for extracting thick and gently inclined coal seam conditions as in the Quang Ninh coal field, have not been satisfactorily investigated in previous studies, which limits the advantages of this advanced mining technology. By using the numerical software PFC 3.1 as the main analysis tool, this paper studies the relationship between cutting height and caving height for efficient top-coal recovery in extra thick and gently inclined coal seam. Taking the condition of Seam 7, Ha Lam coal mine as a case study, the paper recommends the mine to re-organize its operation with a cutting height-to-caving height ratio of 1:5.25 and caving span of 1.2 m per mining cycle for maximum efficiency of the LTCC operation.

Zitieren

APA

Pham, D. H., Le, T. D., Nguyen, P. H., & Pham, V. Q. (2025). Study on ratio of cutting height to caving height for efficient top-coal recovery in extra thick and gently inclined coal seam – a case study of seam 7 Ha Lam coal mine, Vietnam. Journal of Sustainable Mining, 24(2), 203-213. https://doi.org/10.46873/2300-3960.1445

Vancouver

Pham DH, Le TD, Nguyen PH, Pham VQ. Study on ratio of cutting height to caving height for efficient top-coal recovery in extra thick and gently inclined coal seam – a case study of seam 7 Ha Lam coal mine, Vietnam. Journal of Sustainable Mining. 2025;24(2):203-213. doi:10.46873/2300-3960.1445

BibTeX
@article{Pham2025,
  author = {Pham, Duc Hung and Le, Tien Dung and Nguyen, Phi Hung and Pham, Van Quan},
  title = {Study on ratio of cutting height to caving height for efficient top-coal recovery in extra thick and gently inclined coal seam – a case study of seam 7 Ha Lam coal mine, Vietnam},
  journal = {Journal of Sustainable Mining},
  year = {2025},
  volume = {24},
  number = {2},
  pages = {203--213},
  doi = {10.46873/2300-3960.1445}
}
Kostenlos starten →