EUVIMEDEUVIMED entdecken
Crossref

A study of the erosive wear of cold work tool steels

Juan Rodrigo Laguna Camacho, Javier Alejandro Frías Flores, Aldo Santos Calderon Loredo, Andrea Aketzalli Mandujano Rodríguez, Víctor Velázquez Martínez, Armando Aguilar Meléndez, Silvia Marina Sánchez Yáñez

Científica · 30.07.2026 · 30 (2) · 1-11

DOI: 10.46842/ipn.cien.v30n2a02 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Científica, online erschienen am 30.07.2026. Verfasst von Juan Rodrigo Laguna Camacho und 6 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work, a study of erosive wear was conducted on cold-work tool steels, AISI O1 (Non-deforming, slightly alloyed steel) and AISI D2 (Non-deforming steel with high chromium content) subjected to the impact of silicon carbide particles (SiC), to know their performance against this wear process. An erosion rig based on the ASTM G76-95 standard was employed to complete the testing. Tests were carried out using different impact angles, 30°, 45°, 60° and 90°, with a particle velocity of 24 ± 2 m/s and a particle flux of 63 g/min. The abrasive particles had an angular shape, with a particle size of 420–450 µm. The silicon carbide (SiC) particles were used to accelerate the wear process and evaluate the performance of these materials under severe erosion conditions. Characterization techniques such as hardness tests and optical microscopy were used to know the characteristics of the materials, morphology of the abrasive particles and the wear mechanisms identification. The erosion results showed that AISI O1 steel showed higher erosion rates than AISI D2 steel.

Zitieren

APA

Camacho, J. R. L., Flores, J. A. F., Loredo, A. S. C., Rodríguez, A. A. M., Martínez, V. V., Meléndez, A. A., & Yáñez, S. M. S. (2026). A study of the erosive wear of cold work tool steels. Científica, 30(2), 1-11. https://doi.org/10.46842/ipn.cien.v30n2a02

Vancouver

Camacho JRL, Flores JAF, Loredo ASC, Rodríguez AAM, Martínez VV, Meléndez AA, et al. A study of the erosive wear of cold work tool steels. Científica. 2026;30(2):1-11. doi:10.46842/ipn.cien.v30n2a02

BibTeX
@article{Camacho2026,
  author = {Camacho, Juan Rodrigo Laguna and Flores, Javier Alejandro Frías and Loredo, Aldo Santos Calderon and Rodríguez, Andrea Aketzalli Mandujano and Martínez, Víctor Velázquez and Meléndez, Armando Aguilar and Yáñez, Silvia Marina Sánchez},
  title = {A study of the erosive wear of cold work tool steels},
  journal = {Científica},
  year = {2026},
  volume = {30},
  number = {2},
  pages = {1--11},
  doi = {10.46842/ipn.cien.v30n2a02}
}
Kostenlos starten →