Plasma torch using a waveguide bridge at a frequency of 2.45 GHz
Problems of Atomic Science and Technology · 28.10.2026 · 109
DOI: 10.46813/2026-165-109 ↗Kurz gefasst
Fachartikel in der Zeitschrift Problems of Atomic Science and Technology, online erschienen am 28.10.2026. Verfasst von A.G. Nahornyi und 3 weiteren Autor:innen. Die Arbeit nennt 8 Literaturangaben.
Abstract (Originalsprache)
This paper describes an atmospheric-pressure plasma microwave system operating at a frequency of 2.45 GHz. To protect the magnetron generator from parasitic reflections, a waveguide bridge with a connection via the wide wall of the waveguide is used instead of a complex and expensive ferrite circulator. The bridge is based on a waveguide with a cross-section of 90x20 mm. The design was optimized using CST Microwave Studio. Simulation showed that the design provides a return loss at the input of -43 dB at a frequency of 2.45 GHz. In the frequency band from 2.3 to 2.6 GHz, the voltage standing wave ratio (VSWR) does not exceed 1.2. Successful “fire” tests have been carried out in a stream of atmospheric air.
Zitieren
APA
Nahornyi, A., Yeryomin, S., Nahornyi, D., & Roenko, O. (2026). Plasma torch using a waveguide bridge at a frequency of 2.45 GHz. Problems of Atomic Science and Technology, 109. https://doi.org/10.46813/2026-165-109
Vancouver
Nahornyi A, Yeryomin S, Nahornyi D, Roenko O. Plasma torch using a waveguide bridge at a frequency of 2.45 GHz. Problems of Atomic Science and Technology. 2026:109. doi:10.46813/2026-165-109
BibTeX
@article{Nahornyi2026,
author = {Nahornyi, A.G. and Yeryomin, S.О. and Nahornyi, D.A. and Roenko, O.Yu.},
title = {Plasma torch using a waveguide bridge at a frequency of 2.45 GHz},
journal = {Problems of Atomic Science and Technology},
year = {2026},
pages = {109},
doi = {10.46813/2026-165-109}
}
EUVIMED