EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Numerical Study of Gas Flow and Solid Particle Erosion in the Fuel Gas Distribution Octopus Pipe of a Gas Turbine

Rendy Dwi Anggara Prasetia, Muhammad Agung Bramantya, Joko Waluyo

Asian Journal of Engineering, Social and Health · 28.03.2026 · 5 (3) · 266-284

DOI: 10.46799/ajesh.v5i3.755 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Asian Journal of Engineering, Social and Health, online erschienen am 28.03.2026. Verfasst von Rendy Dwi Anggara Prasetia und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The Fuel Gas Distribution Octopus Pipe is a critical component of the Siemens V94.2 gas turbine operated at PLTGU Muara Tawar, responsible for distributing fuel gas to the burners in premix mode. This study aims to analyze the gas-flow characteristics and to predict the erosion rate using a Computational Fluid Dynamics (CFD) approach. Numerical simulations were performed on the 16Mo3 manifold pipe geometry using the Realizable k–? turbulence model and the Oka erosion prediction model. The operating parameters were varied in terms of gas flow velocity and solid-particle mass flow rate. The results show that the primary erosion mechanism is dominated by inertial impaction, in which particles with a Stokes number greater than 0.1 are unable to follow the gas streamlines in elbow regions and tend to impact the outer elbow wall. Quantitatively, increasing gas velocity significantly raises the maximum erosion rate. At 52.85 m/s, the maximum erosion rate is predicted to be 5.56 × 10-8 kg/m2·s, increasing to 1.83 × 10-7 kg/m2·s at 70.47 m/s (field condition), and reaching 3.30 × 10-7 kg/m2·s at 88.09 m/s. Increasing the solid-particle mass flow rate also increases the erosion rate in an approximately linear manner, from 1.77 × 10-7 kg/m2·s to 2.28 × 10-7 kg/m2·s as the particle mass flow rate increases from 1.31 × 10-7 kg/s to 1.69 × 10-7 kg/s.

Zitieren

APA

Prasetia, R. D. A., Bramantya, M. A., & Waluyo, J. (2026). Numerical Study of Gas Flow and Solid Particle Erosion in the Fuel Gas Distribution Octopus Pipe of a Gas Turbine. Asian Journal of Engineering, Social and Health, 5(3), 266-284. https://doi.org/10.46799/ajesh.v5i3.755

Vancouver

Prasetia RDA, Bramantya MA, Waluyo J. Numerical Study of Gas Flow and Solid Particle Erosion in the Fuel Gas Distribution Octopus Pipe of a Gas Turbine. Asian Journal of Engineering, Social and Health. 2026;5(3):266-284. doi:10.46799/ajesh.v5i3.755

BibTeX
@article{Prasetia2026,
  author = {Prasetia, Rendy Dwi Anggara and Bramantya, Muhammad Agung and Waluyo, Joko},
  title = {Numerical Study of Gas Flow and Solid Particle Erosion in the Fuel Gas Distribution Octopus Pipe of a Gas Turbine},
  journal = {Asian Journal of Engineering, Social and Health},
  year = {2026},
  volume = {5},
  number = {3},
  pages = {266--284},
  doi = {10.46799/ajesh.v5i3.755}
}
Kostenlos starten →