Thermal conductivity and viscosity of surfactant-stabilised biolubricants containing TiO2 and BN nanoparticles
Tribology and Materials · 12.06.2026 · 5 (2) · 81
DOI: 10.46793/tribomat.2026.008 ↗Kurz gefasst
Fachartikel in der Zeitschrift Tribology and Materials, online erschienen am 12.06.2026. Verfasst von Yathish Kumar und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
This study examines how adding titanium dioxide (TiO2) and boron nitride (BN) nanoparticles to Jatropha-based biolubricant improves its viscosity and thermal conductivity. The impact of sonication time, concentration of surfactant (oleic acid), nanoparticle type and nanoparticle content on the thermal and rheological behaviour of the biolubricants was assessed. To guarantee homogeneous dispersion, biolubricants containing 0.05 – 0.20 wt. % TiO2 or BN were made using ultrasonic agitation. To determine the importance of the parameters and their interactions, a statistical analysis of thermal conductivity and viscosity was conducted. Because of its higher heat transfer properties and dispersion stability, BN consistently produced significant improvements in the biolubricant's thermal performance when nanoparticles were added. The highest thermal conductivity of 0.262 W/mK was obtained at 0.20 wt. % BN nanoparticle content and a 10X surfactant concentration, while viscosity remained within acceptable limits for lubrication applications. The type of nanoparticle emerged as the most significant factor, followed by nanoparticle content, for both thermal conductivity and viscosity. Overall, the results indicate that optimising formulation parameters can significantly improve heat transfer performance without compromising flow behaviour. Biolubricants filled with BN and TiO2, therefore, show strong potential as environmentally sustainable lubricants for thermal management and industrial applications.
Zitieren
APA
Kumar, Y., Gopalakrishna, B. K., Prabhu, R., Mendonca, S., D`silva, R., Mallya, R., & Hariharan, G. (2026). Thermal conductivity and viscosity of surfactant-stabilised biolubricants containing TiO2 and BN nanoparticles. Tribology and Materials, 5(2), 81. https://doi.org/10.46793/tribomat.2026.008
Vancouver
Kumar Y, Gopalakrishna BK, Prabhu R, Mendonca S, D`silva R, Mallya R, et al. Thermal conductivity and viscosity of surfactant-stabilised biolubricants containing TiO2 and BN nanoparticles. Tribology and Materials. 2026;5(2):81. doi:10.46793/tribomat.2026.008
BibTeX
@article{Kumar2026,
author = {Kumar, Yathish and Gopalakrishna, Binu Kottoor and Prabhu, Ravikantha and Mendonca, Sharun and D`silva, Rolvin and Mallya, Ravindra and Hariharan, Girish},
title = {Thermal conductivity and viscosity of surfactant-stabilised biolubricants containing TiO2 and BN nanoparticles},
journal = {Tribology and Materials},
year = {2026},
volume = {5},
number = {2},
pages = {81},
doi = {10.46793/tribomat.2026.008}
}
EUVIMED