EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Combined mechanical mixing and hydrothermal synthesis of gehlenite-based ceramics

Auns Qusai Hashim Al-Neami, Hasnaa Shareef Ahmed Jolak, Ayad Murad Takhakh, Fadhil Kareem Farhan

Tribology and Materials · 16.03.2026 · 1 (5) · 38

DOI: 10.46793/tribomat.2026.006 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Tribology and Materials, online erschienen am 16.03.2026. Verfasst von Auns Qusai Hashim Al-Neami und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Gehlenite-based ceramics in the CaO-Al2O3-SiO2 calcium aluminosilicate (CAS) system were synthesised using a combined approach that integrates hydrothermal treatment with mechanical mixing. Three formulations with varying CaO:Al2O3:SiO2 ratios were prepared to investigate phase development. The precursor powders were first mechanically mixed in water and subjected to hydrothermal reaction at 200 °C for 48 h, then calcined (1000 °C) and sintered (1200 − 1250 °C) into dense pellets. X-ray diffraction (XRD) analysis confirmed the formation of gehlenite (Ca2Al2SiO7) as the major phase, with minor secondary phases (wollastonite, corundum and cristobalite) noticeable at 1200 °C. Notably, at 1250 °C, the gehlenite reflections intensified, indicating more complete crystallisation. Scanning electron microscopy (SEM) revealed a fine microstructure of submicron particles (0.4 − 0.8 µm) agglomerated into a porous network. Energy-dispersive X-ray spectroscopy (EDS) showed elemental compositions in close agreement with the nominal stoichiometry (within approximately 3 wt. % for Ca, Al and Si), confirming homogeneous mixing. The combined hydrothermal-mechanical route produced gehlenite ceramics at a sintering temperature (approximately 1250 °C) lower than conventional solid-state methods, achieving high phase purity and uniform microstructure. The enhanced phase formation is attributed to improved precursor reactivity and nucleation from the hydrothermal step. This approach offers a viable pathway to fabricate CAS engineering ceramics with controlled crystallinity and porosity for potential high-temperature and structural applications.

Zitieren

APA

Al-Neami, A. Q. H., Jolak, H. S. A., Takhakh, A. M., & Farhan, F. K. (2026). Combined mechanical mixing and hydrothermal synthesis of gehlenite-based ceramics. Tribology and Materials, 1(5), 38. https://doi.org/10.46793/tribomat.2026.006

Vancouver

Al-Neami AQH, Jolak HSA, Takhakh AM, Farhan FK. Combined mechanical mixing and hydrothermal synthesis of gehlenite-based ceramics. Tribology and Materials. 2026;1(5):38. doi:10.46793/tribomat.2026.006

BibTeX
@article{AlNeami2026,
  author = {Al-Neami, Auns Qusai Hashim and Jolak, Hasnaa Shareef Ahmed and Takhakh, Ayad Murad and Farhan, Fadhil Kareem},
  title = {Combined mechanical mixing and hydrothermal synthesis of gehlenite-based ceramics},
  journal = {Tribology and Materials},
  year = {2026},
  volume = {1},
  number = {5},
  pages = {38},
  doi = {10.46793/tribomat.2026.006}
}
Kostenlos starten →