EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Microfacies and Petrophysical Controls on the Jeribe Reservoir: Application to 3D Facies Modeling in the X Gas Field, Northeastern Iraq

Noor Jawad, Hamid A. Alsultan

The Iraqi Geological Journal · 31.05.2026 · 98-115

DOI: 10.46717/igj.2026.59.1e.7 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Iraqi Geological Journal, online erschienen am 31.05.2026. Verfasst von Noor Jawad und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aims to develop a three-dimensional facies model for the Jeribe Formation in the X Gas field, northeastern Iraq, within the Unstable shelf. The field lies within one of the most important NW-SE trending anticlinal structures in eastern Iraq. The reservoir characteristics of the Jeribe Formation exhibit significant vertical variation. Based on lithological changes, microfacies variations, and well-log responses. The formation was subdivided into seven units. Most units exhibit good reservoir quality due to the development of secondary porosity associated with fracturing and dissolution processes, except for the first and sixth units, which are predominantly anhydrite and display poor reservoir properties. Four wells (X-1, X-2, X-3, and X-4) were used in this study, with well X-2 selected as the main reference well due to the availability of core samples. The Jeribe Formation has an average thickness of about 60m, with sampling intervals ranging from 1.5 to 2m. Petrographic analysis of 52 thin sections from well X-2 resulted in the identification of six microfacies: lime mudstone, lime mudstone – wackestone, wackestone, wackestone–packstone, bioclastic Packstone, and peloidal Packstone. Reservoir properties were evaluated using well-log data, including shale volume, porosity, and fluid saturation, derived from sonic, neutron porosity, density, resistivity, and spectral gamma ray logs. The facies demonstrate a strong diagenetic control on reservoir quality. Reservoir quality increases toward well X-2 and decreases toward well X-4. A 3D facies model was constructed using petrel software by using the Sequential Indicator Simulation (SIS) method to enhance understanding of facies distribution and support gas-reserve evaluation.

Zitieren

APA

Jawad, N., & Alsultan, H. A. (2026). Microfacies and Petrophysical Controls on the Jeribe Reservoir: Application to 3D Facies Modeling in the X Gas Field, Northeastern Iraq. The Iraqi Geological Journal, 98-115. https://doi.org/10.46717/igj.2026.59.1e.7

Vancouver

Jawad N, Alsultan HA. Microfacies and Petrophysical Controls on the Jeribe Reservoir: Application to 3D Facies Modeling in the X Gas Field, Northeastern Iraq. The Iraqi Geological Journal. 2026:98-115. doi:10.46717/igj.2026.59.1e.7

BibTeX
@article{Jawad2026,
  author = {Jawad, Noor and Alsultan, Hamid A.},
  title = {Microfacies and Petrophysical Controls on the Jeribe Reservoir: Application to 3D Facies Modeling in the X Gas Field, Northeastern Iraq},
  journal = {The Iraqi Geological Journal},
  year = {2026},
  pages = {98--115},
  doi = {10.46717/igj.2026.59.1e.7}
}
Kostenlos starten →