The properties of fresh and hardened cement paste with waste silica fume used as cement replacement
Egitania Sciencia · 2026
DOI: 10.46691/4fc10v63 ↗Kurz gefasst
Fachartikel in der Zeitschrift Egitania Sciencia, 2026. Verfasst von Vilma Vaicekauskiene und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).
Abstract (Originalsprache)
The study analyses the size, physical properties and structure of waste silica fume particles generated during the production of silicon and ferrosilicon alloys. The results of the chemical analysis of silica fume show that silica prevails in the composition, up to 93.8%. The bulk density of silica fume is 480 kg/m3, and the density of the particles is 2580 kg/m3. The specific surface area of the particles is 1644 cm2/g. The determined average size of silica fume particles is 1.6 times larger than that of cement particles and reaches 24.95 µm. SEM analysis confirms the presence of large agglomerates in silica fume. XRD analysis of the structure of silica fume revealed that amorphous phase and the mineral quartz prevail in the sample. The influence of silica fume on the properties of hardened cement paste was investigated. Six batches of samples, where cement was replaced with silica fume in the following proportions: 0%, 1%, 2%, 3%, 4%, 5%, were analysed. It was determined that when up to 5% of cement was replaced with silica fume EXO peak duration increased by 38% and EXO peak temperature fell to 2.6%. The ultrasonic pulse velocity, compressive and flexural strengths, porosity and water absorption values of the 28-day-hardened cement paste samples showed that 2% is the most optimal substitution of cement with silica fume. When 2% of cement is replaced with silica fume, the density and ultrasonic pulse velocity of the samples increased by 1%, the values of compressive and flexural strength are 72% and 42% higher than in the control sample. Porosity and water absorption are the lowest compared to other samples. Silica fume can be used in the production of high-quality concrete when cement is replaced with 2% of silica fume.
Zitieren
APA
Vaicekauskiene, V., NAGROCKIENE, D., & Pundiene, I. (2026). The properties of fresh and hardened cement paste with waste silica fume used as cement replacement. Egitania Sciencia. https://doi.org/10.46691/4fc10v63
Vancouver
Vaicekauskiene V, NAGROCKIENE D, Pundiene I. The properties of fresh and hardened cement paste with waste silica fume used as cement replacement. Egitania Sciencia. 2026. doi:10.46691/4fc10v63
BibTeX
@article{Vaicekauskiene2026,
author = {Vaicekauskiene, Vilma and NAGROCKIENE, Dzigita and Pundiene, Ina},
title = {The properties of fresh and hardened cement paste with waste silica fume used as cement replacement},
journal = {Egitania Sciencia},
year = {2026},
doi = {10.46691/4fc10v63}
}
EUVIMED