EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Optimization of Grinding Time in Hematite Beneficiation – A Case Study of Ajabanoko Hematite Deposit

Thomas Ayodele, Yahaya Sariyu, Momoh Monday Itopa

Engineering Research journal · 25.07.2026 · 6 (2) · 86-96

DOI: 10.46654/9ftswz81 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Engineering Research journal, online erschienen am 25.07.2026. Verfasst von Thomas Ayodele und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigated the optimization of grinding time in Hematite beneficiation using representative Hematite samples obtained from Ajabanoko. The primary objective was to determine the optimum grinding time that would maximize iron recovery while minimizing energy consumption and preventing overgrinding. Laboratory beneficiation tests were conducted by grinding identical Hematite samples at different time intervals of 5, 10, 15, 20, and 25 minutes under controlled operating conditions. The ground products were subjected to sieve analysis and magnetic separation to evaluate particle size distribution, concentrate grade, iron recovery, and beneficiation efficiency. The results indicated that grinding time had a significant influence on beneficiation performance. As grinding time increased, particle size decreased, resulting in improved mineral liberation and higher iron recovery. The highest beneficiation efficiency was obtained at 20 minutes, which produced an iron recovery of 92.5% and a concentrate grade of 67.2% Fe. Grinding beyond the optimum time resulted in a slight decline in recovery due to overgrinding and the formation of ultrafine particles, while energy consumption continued to increase. The study concludes that a grinding time of 20 minutes provides the optimum operating condition for the beneficiation of the Ajabanoko Hematite under the experimental conditions adopted. The findings of this study will contribute to improved beneficiation efficiency, reduced processing costs, and enhanced utilization of Hematite resources.

Zitieren

APA

Ayodele, T., Sariyu, Y., & Itopa, M. M. (2026). Optimization of Grinding Time in Hematite Beneficiation – A Case Study of Ajabanoko Hematite Deposit. Engineering Research journal, 6(2), 86-96. https://doi.org/10.46654/9ftswz81

Vancouver

Ayodele T, Sariyu Y, Itopa MM. Optimization of Grinding Time in Hematite Beneficiation – A Case Study of Ajabanoko Hematite Deposit. Engineering Research journal. 2026;6(2):86-96. doi:10.46654/9ftswz81

BibTeX
@article{Ayodele2026,
  author = {Ayodele, Thomas and Sariyu, Yahaya and Itopa, Momoh Monday},
  title = {Optimization of Grinding Time in Hematite Beneficiation – A Case Study of Ajabanoko Hematite Deposit},
  journal = {Engineering Research journal},
  year = {2026},
  volume = {6},
  number = {2},
  pages = {86--96},
  doi = {10.46654/9ftswz81}
}
Kostenlos starten →