ENHANCING VERTICAL ACCURACY OF OPEN-SOURCE DIGITAL ELEVATION MODELS USING IMAGE BLENDING
Research Digest on Engineering Management and Social Innovations · 20.06.2026 · 2 (6)
DOI: 10.46647/rdems0206002 ↗Kurz gefasst
Fachartikel in der Zeitschrift Research Digest on Engineering Management and Social Innovations, online erschienen am 20.06.2026. Verfasst von V Nagaseshu und 3 weiteren Autor:innen.
Abstract (Originalsprache)
Digital Elevation Model (DEM) provides the third-dimension information of the terrain relief. In the present-day scenario, DEM became the most inevitable part of Remote Sensing and Geographic Information System (GIS) because of its wide capabilities in extracting features of ground profile. DEM is playing a prominent role in various fields like topographic mapping, 3D simulations, runoff modelling, disaster risk management etc. Fine or higher resolution DEMs are capable of depicting even the complex topography of the terrain with better detailing and accuracy. However, as the resolution of DEM becomes coarser, its accuracy decreases, because the elevations will get averaged out with in pixel. Since most open source DEMs are available at coarser resolutions, and considering high cost and availability of high resolution DEMs in data scarce areas, the demand and necessity for high accurate open source DEMs increased enormously. This led to the demand of enhancement of open source DEMs. Initially, this study addresses the inherent vertical inaccuracies in open source DEMs like Shuttle Radar Topography Mission (SRTM) and Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER). To generate a new DEM with better vertical accuracy using these two open source DEMs SRTM and ASTER, Image blending approach using the Add-weighted technique was adopted. In the study area, total 57 Ground Control Points (GCPs) were acquired using Differential Global Positioning System (DGPS) survey to serve as Ground truth. Results shows that the Root Mean Square Error (RMSE) of elevation across the study area, decreased from 3.11 meters for SRTM and 8.14 meters for ASTER to 1.74 meters in the New DEM developed by blending technique, demonstrating a significant improvement in vertical accuracy.
Zitieren
APA
Nagaseshu, V., Deepthi, C., Rachana, M., & Imran, S. M. (2026). ENHANCING VERTICAL ACCURACY OF OPEN-SOURCE DIGITAL ELEVATION MODELS USING IMAGE BLENDING. Research Digest on Engineering Management and Social Innovations, 2(6). https://doi.org/10.46647/rdems0206002
Vancouver
Nagaseshu V, Deepthi C, Rachana M, Imran SM. ENHANCING VERTICAL ACCURACY OF OPEN-SOURCE DIGITAL ELEVATION MODELS USING IMAGE BLENDING. Research Digest on Engineering Management and Social Innovations. 2026;2(6). doi:10.46647/rdems0206002
BibTeX
@article{Nagaseshu2026,
author = {Nagaseshu, V and Deepthi, Ch and Rachana, M and Imran, Shaik Mohammad},
title = {ENHANCING VERTICAL ACCURACY OF OPEN-SOURCE DIGITAL ELEVATION MODELS USING IMAGE BLENDING},
journal = {Research Digest on Engineering Management and Social Innovations},
year = {2026},
volume = {2},
number = {6},
doi = {10.46647/rdems0206002}
}
EUVIMED