“Investigation of Lap Shear Strength on Hybrid FRP (Carbon / Glass) / Al6061 Single Lap Joint
Journal on Materials and its Characterization · 2023
DOI: 10.46632/jmc/2/1/9 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal on Materials and its Characterization, 2023.
Abstract (Originalsprache)
The joining strength of three different layered composites made of carbon-glass-carbon-glass, carbonglass-glass-carbon, and glasscarbon-carbon-glass was investigated in the current work utilising a single lap joint. Composite materials containing carbon fibre and glass fibre reinforcement were bonded with 6 series aluminium alloy. As a joining method, adhesive joints, mechanical joints, and hybrid joints (a combination of adhesive and mechanical joints) were all employed. It was discovered that the mechanical and hybrid joints in the carbon-glass-glass-carbon layered composite performed better than those in other layered composites and adhesive bonding joints. The mechanical and hybrid joining of the carbon-glassglass-carbon layered composite was found to have the highest strength among all other combinations tested in this study, with maximum loads of 3.33 KN and 3.14 KN, respectively. The other combinations had maximum loads that were lower than 3.33 KN.
Zitieren
APA
(2023). “Investigation of Lap Shear Strength on Hybrid FRP (Carbon / Glass) / Al6061 Single Lap Joint. Journal on Materials and its Characterization. https://doi.org/10.46632/jmc/2/1/9
Vancouver
“Investigation of Lap Shear Strength on Hybrid FRP (Carbon / Glass) / Al6061 Single Lap Joint. Journal on Materials and its Characterization. 2023. doi:10.46632/jmc/2/1/9
BibTeX
@article{euvimed2023,
title = {“Investigation of Lap Shear Strength on Hybrid FRP (Carbon / Glass) / Al6061 Single Lap Joint},
journal = {Journal on Materials and its Characterization},
year = {2023},
doi = {10.46632/jmc/2/1/9}
}
EUVIMED