Effect of Screw Distribution on the Structural Response and Buckling Behavior of Built-Up Cold-Formed Steel Columns
Proceedings of Engineering and Technology Innovation · 31.10.2026 · 34 · 138-153
DOI: 10.46604/peti.2026.16660 ↗Kurz gefasst
Fachartikel in der Zeitschrift Proceedings of Engineering and Technology Innovation, online erschienen am 31.10.2026. Verfasst von Zamzami Septiropa und 3 weiteren Autor:innen. Die Arbeit nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
Built-up cold-formed steel (CFS) columns offer a high strength-to-weight ratio, but the influence of screw distribution on elastic response and buckling behavior remains insufficiently understood. This study investigates five screw distributions (S50–S90) in double back-to-back (dBB) and double flange-to-flange (dFF) columns using finite element analysis and experimental compression tests. Six self-drilling screws and a column length of 500 mm are maintained, so screw spacing and end distance vary simultaneously. In dBB, equivalent elastic strain and stress vary by 22.31% and 22.94%, respectively, compared with 2.64% and 6.82% in dFF. The buckling load factor (BLF) varies by 7.11% for dBB and 3.22% for dFF, indicating greater sensitivity to screw distribution. S60 produces the highest BLF for dBB (2.4774), whereas S80 produces the highest for dFF (3.3173). These findings demonstrate that profile orientation influences structural response and relative elastic buckling stability. The BLF indicates comparative elastic stability, not actual ultimate compression capacity.
Zitieren
APA
Septiropa, Z., Octavio, A. M., Soegiharto, A. F. H., & Sulaiman, A. (2026). Effect of Screw Distribution on the Structural Response and Buckling Behavior of Built-Up Cold-Formed Steel Columns. Proceedings of Engineering and Technology Innovation, 34, 138-153. https://doi.org/10.46604/peti.2026.16660
Vancouver
Septiropa Z, Octavio AM, Soegiharto AFH, Sulaiman A. Effect of Screw Distribution on the Structural Response and Buckling Behavior of Built-Up Cold-Formed Steel Columns. Proceedings of Engineering and Technology Innovation. 2026;34:138-153. doi:10.46604/peti.2026.16660
BibTeX
@article{Septiropa2026,
author = {Septiropa, Zamzami and Octavio, Abi Mufid and Soegiharto, Achmad Fauzan Hery and Sulaiman, Arizu},
title = {Effect of Screw Distribution on the Structural Response and Buckling Behavior of Built-Up Cold-Formed Steel Columns},
journal = {Proceedings of Engineering and Technology Innovation},
year = {2026},
volume = {34},
pages = {138--153},
doi = {10.46604/peti.2026.16660}
}
EUVIMED