EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Quantifying the Influence of Surface Roughness on Concrete Overlay Bonding in Sulfuric Acid Environments

Nurdeen Mohamed Altwair, Younis Omran Yacoub, Alhussin Faraj Aliwan, Waled Faraj Alnaas, Saleh Elmahdi Abdulsalam, Abdualhamid Mohamed Alsharif

Proceedings of Engineering and Technology Innovation · 04.06.2025 · 30 · 38-52

DOI: 10.46604/peti.2024.14713 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of Engineering and Technology Innovation, online erschienen am 04.06.2025. Verfasst von Nurdeen Mohamed Altwair und 5 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study examines the impact of sulfuric acid on the concrete bond interface, emphasizing surface roughness variation. Three surface treatments: control surface (CS) defined as as-cast without surface preparation, drilled holes (DS), and grooved surfaces (GS). Specimens are immersed in a 5% sulfuric acid solution for 15 and 30 days. Bond performance is assessed through slant shear tests, splitting tensile tests, ultrasonic pulse velocity (UPV) measurements, mass loss evaluation, X-ray diffraction (XRD) analysis, and visual inspections of the degraded specimens. The results show that DS and GS significantly enhance shear and splitting tensile strength compared to CS. Among the treatments, GS specimens exhibited the highest shear strength and superior resistance to debonding under sulfuric acid exposure. While sulfuric acid exposure had minimal impact on UPV, roughened surfaces maintained higher UPV due to improved contact area. Visually, the GS specimens retained structural integrity after 30 days in 5% sulfuric acid, outperforming DS and CS specimens, as corroborated by XRD analysis.

Zitieren

APA

Altwair, N. M., Yacoub, Y. O., Aliwan, A. F., Alnaas, W. F., Abdulsalam, S. E., & Alsharif, A. M. (2025). Quantifying the Influence of Surface Roughness on Concrete Overlay Bonding in Sulfuric Acid Environments. Proceedings of Engineering and Technology Innovation, 30, 38-52. https://doi.org/10.46604/peti.2024.14713

Vancouver

Altwair NM, Yacoub YO, Aliwan AF, Alnaas WF, Abdulsalam SE, Alsharif AM. Quantifying the Influence of Surface Roughness on Concrete Overlay Bonding in Sulfuric Acid Environments. Proceedings of Engineering and Technology Innovation. 2025;30:38-52. doi:10.46604/peti.2024.14713

BibTeX
@article{Altwair2025,
  author = {Altwair, Nurdeen Mohamed and Yacoub, Younis Omran and Aliwan, Alhussin Faraj and Alnaas, Waled Faraj and Abdulsalam, Saleh Elmahdi and Alsharif, Abdualhamid Mohamed},
  title = {Quantifying the Influence of Surface Roughness on Concrete Overlay Bonding in Sulfuric Acid Environments},
  journal = {Proceedings of Engineering and Technology Innovation},
  year = {2025},
  volume = {30},
  pages = {38--52},
  doi = {10.46604/peti.2024.14713}
}
Kostenlos starten →