Determining the accuracy of SLAM and SLAM GNSS-RTK scanning for monitoring earthworks
Acta Montanistica Slovaca · 21.03.2026 · 934
DOI: 10.46544/ams.v30i4.08 ↗Kurz gefasst
Fachartikel in der Zeitschrift Acta Montanistica Slovaca, online erschienen am 22.03.2026. Verfasst von Tomáš KŘEMEN. Die Arbeit nennt 33 Literaturangaben.
Abstract (Originalsprache)
This study evaluates the accuracy of SLAM-based LiDAR scanning and SLAM integrated with GNSS-RTK for monitoring large-scale earthworks. The experiment was conducted on a soil deposit created during motorway construction in Central Bohemia, measuring approximately 150 m × 55 m × 15 m. A Leica P40 terrestrial laser scanner served as the reference system, producing a high-precision point cloud georeferenced via ground control points (GCPs). The tested system, Emesent Hovermap ST-X, was deployed in two configurations: (i) georeferencing using GCPs and (ii) trajectory determination via a continuously connected GNSS-RTK receiver mounted on the scanning backpack. Data processing involved point cloud registration, smoothing using Moving Least Squares, and accuracy assessment through root mean square deviation (RMSD) analysis against the reference dataset. Four SLAM point clouds were acquired—two using GCPs and two using GNSS-RTK—along with their smoothed variants. Results indicate that GCP-based georeferencing achieved RMSD values around 17 mm, closely matching the manufacturer’s declared mapping accuracy of 15 mm. GNSS-RTK-based measurements yielded slightly higher RMSD values (≈20 mm), which remain within acceptable limits given the inherent GNSS-RTK positional accuracy (10 mm horizontally, 40 mm vertically). Systematic height shifts were observed in RTK datasets, emphasizing the need for minimal control points to correct vertical bias. The findings confirm that SLAM scanning is a more practical alternative to static terrestrial scanning for earthwork monitoring, significantly reducing operational complexity and time. While GCP-based workflows deliver optimal accuracy, GNSS-RTK integration offers a faster solution with minor trade-offs in vertical precision. Proper route planning and strategic GCP placement are critical for achieving manufacturer-specified accuracy, particularly in areas with limited connectivity between scanned surfaces. Overall, both approaches provide sufficient precision for engineering applications, with RMSD values ≤25 mm, validating SLAM technology as an efficient tool for large-scale geospatial monitoring.
Zitieren
APA
KŘEMEN, T. (2026). Determining the accuracy of SLAM and SLAM GNSS-RTK scanning for monitoring earthworks. Acta Montanistica Slovaca, 934. https://doi.org/10.46544/ams.v30i4.08
Vancouver
KŘEMEN T. Determining the accuracy of SLAM and SLAM GNSS-RTK scanning for monitoring earthworks. Acta Montanistica Slovaca. 2026:934. doi:10.46544/ams.v30i4.08
BibTeX
@article{KEMEN2026,
author = {KŘEMEN, Tomáš},
title = {Determining the accuracy of SLAM and SLAM GNSS-RTK scanning for monitoring earthworks},
journal = {Acta Montanistica Slovaca},
year = {2026},
pages = {934},
doi = {10.46544/ams.v30i4.08}
}
EUVIMED