EUVIMEDEUVIMED entdecken
Crossref

Modeling flow ratios of the slide gate valve in hydraulic and pneumatic piping systems

Ľubomíra KMEŤOVÁ

Acta Montanistica Slovaca · 21.03.2026 · 864

DOI: 10.46544/ams.v30i4.03 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Acta Montanistica Slovaca, online erschienen am 22.03.2026. Verfasst von Ľubomíra KMEŤOVÁ. Die Arbeit nennt 15 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the influence of the slide gate valve's closure degree on hydraulic performance parameters, specifically the loss coefficient and pressure losses during water flow. The research combines analytical calculations with numerical simulations using Computational Fluid Dynamics (CFD) in ANSYS CFX to evaluate flow behaviour at three valve opening positions: 25 %, 50 %, and 75 %. The selected valve model, IKO-Plus – DN50 – PN-R14, was analysed under varying inlet velocities (0.5 m·s⁻¹, 1.0 m·s⁻¹, and 2.0 m·s⁻¹) to assess its behaviour in a hydraulic pipeline system. The results demonstrate that increasing the closure degree leads to a significant rise in pressure losses and loss coefficients, primarily due to flow acceleration, vortex formation, and turbulence in the narrowed sections of the valve. These findings highlight the critical impact of valve geometry and operating conditions on system efficiency and component wear. CFD simulations provided detailed visualizations of velocity streamlines and pressure distributions, revealing the formation of low-pressure zones and intense vortex structures downstream of the valve. The study confirms a high level of agreement between analytical and numerical approaches, validating the accuracy of the simulation model. The insights gained from this research can be applied to optimize gate valve design, improve material selection, and enhance the reliability of hydraulic and pneumatic systems. The methodology is also adaptable for analysing other types of valves and fittings exposed to similar flow conditions.

Zitieren

APA

KMEŤOVÁ, Ľ. (2026). Modeling flow ratios of the slide gate valve in hydraulic and pneumatic piping systems. Acta Montanistica Slovaca, 864. https://doi.org/10.46544/ams.v30i4.03

Vancouver

KMEŤOVÁ Ľ. Modeling flow ratios of the slide gate valve in hydraulic and pneumatic piping systems. Acta Montanistica Slovaca. 2026:864. doi:10.46544/ams.v30i4.03

BibTeX
@article{KMEOV2026,
  author = {KMEŤOVÁ, Ľubomíra},
  title = {Modeling flow ratios of the slide gate valve in hydraulic and pneumatic piping systems},
  journal = {Acta Montanistica Slovaca},
  year = {2026},
  pages = {864},
  doi = {10.46544/ams.v30i4.03}
}
Kostenlos starten →