EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

PROTOTYPE OF AN IOT-BASED PLC CONTROL AND MONITORING SYSTEM FOR POWER SUPPLY (GENERATOR SET) AND ELECTRICITY EFFICIENCY MONITORING AS ELECTRICAL ENGINEERING LEARNING MEDIA

Muhammad Zaim Arief

Jurnal Penelitian · 01.12.2025 · 19 (4) · 340-351

DOI: 10.46491/jp.v19i4.1830 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Penelitian, online erschienen am 01.12.2025. Verfasst von Muhammad Zaim Arief. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Electrical equipment may be damaged or become unavailable when the supplied power exceeds system capacity or when the main electricity supply experiences a blackout. Generator sets are commonly used as backup power sources, but their limited capacity requires appropriate load prioritization. This study developed a prototype integrating a programmable logic controller (PLC), PZEM-004T electrical sensor, ESP32 microcontroller, relay modules, and a web-based monitoring interface to control priority and non-priority loads. A prototype-based experimental method was employed through whole-system functional testing, no-load testing, measurements under 5 W, 6 W, and 19 W load conditions, website data acquisition, and overload-control testing. Ten website measurements were recorded at two-second intervals for each load. The mean website power readings were 4.80 W, 5.74 W, and 18.50 W, corresponding to relative deviations of 4.00%, 4.33%, and 2.63% from the nominal load ratings. Comparison between the reference voltage measurements and website readings produced an average relative difference of 0.29%. The website displayed voltage, current, and power data consistently, while the PLC and relay system performed the intended load-control function. However, end-to-end communication latency and repeated overload-detection accuracy were not separately quantified. The prototype provides a practical platform for learning electrical measurement, PLC programming, load management, embedded systems, and IoT-based monitoring. Further research should use calibrated reference instruments, repeated overload trials, network-latency measurements, and long-term reliability testing.

Zitieren

APA

Arief, M. Z. (2025). PROTOTYPE OF AN IOT-BASED PLC CONTROL AND MONITORING SYSTEM FOR POWER SUPPLY (GENERATOR SET) AND ELECTRICITY EFFICIENCY MONITORING AS ELECTRICAL ENGINEERING LEARNING MEDIA. Jurnal Penelitian, 19(4), 340-351. https://doi.org/10.46491/jp.v19i4.1830

Vancouver

Arief MZ. PROTOTYPE OF AN IOT-BASED PLC CONTROL AND MONITORING SYSTEM FOR POWER SUPPLY (GENERATOR SET) AND ELECTRICITY EFFICIENCY MONITORING AS ELECTRICAL ENGINEERING LEARNING MEDIA. Jurnal Penelitian. 2025;19(4):340-351. doi:10.46491/jp.v19i4.1830

BibTeX
@article{Arief2025,
  author = {Arief, Muhammad Zaim},
  title = {PROTOTYPE OF AN IOT-BASED PLC CONTROL AND MONITORING SYSTEM FOR POWER SUPPLY (GENERATOR SET) AND ELECTRICITY EFFICIENCY MONITORING AS ELECTRICAL ENGINEERING LEARNING MEDIA},
  journal = {Jurnal Penelitian},
  year = {2025},
  volume = {19},
  number = {4},
  pages = {340--351},
  doi = {10.46491/jp.v19i4.1830}
}
Kostenlos starten →