A Comparative Technical and Economic Study of the Application of ICCP and SACP to Tugboat Hulls
Dinamika Bahari · 28.10.2026 · 7 (2) · 100-110
DOI: 10.46484/db.v7i2n.1818 ↗Kurz gefasst
Fachartikel in der Zeitschrift Dinamika Bahari, online erschienen am 28.10.2026. Verfasst von Andi Riswansyah und 1 weiteren Autor:innen.
Abstract (Originalsprache)
Structural damage caused by corrosion on a ship’s hull poses a serious challenge in the maritime industry, potentially compromising structural integrity, driving up maintenance costs, and shortening the overall operational lifespan of the fleet. This situation underscores the urgency of implementing reliable and efficient protection systems to mitigate the rate of material degradation on ship hulls. This study sets out to assess and compare two corrosion-protection strategies, Sacrificial Anode Cathodic Protection (SACP) and Impressed Current Cathodic Protection (ICCP), with particular attention to how technically sound and cost-efficient each is for tugboat applications. The technical analysis was conducted by calculating the required protection current, which was then evaluated using the Simple Additive Weighting (SAW) method, while the economic aspects were analyzed using the Life Cycle Cost (LCC) approach over a 10-year period. The weights for each criterion were derived from an expert judgment questionnaire, yielding a Consistency Ratio (CR) of 0.064. As this stays under the 0.1 acceptability ceiling, the pairwise comparison matrix can be treated as sound and fit for use in later calculations. The calculation results show that the required protection current is 3.28 A for a submerged surface area of 164.1 m². The ICCP system is designed using two inert anodes with a transformer-rectifier capacity of 10 V and 5 A; the SACP system uses 32 zinc anodes with a protection lifespan of approximately 3 years. Based on the SAW analysis, the ICCP system received a preference score of 0.943 (94.3%), higher than the SACP’s score of 0.543 (54.3%), indicating a higher technical preference for ICCP under the adopted criteria. From an economic perspective, the LCC analysis results show that the ICCP system has a total cost of Rp 65,221,500, which is lower than the SACP system’s cost of Rp 95,259,600.
Zitieren
APA
Riswansyah, A., & Hariyanto, S. (2026). A Comparative Technical and Economic Study of the Application of ICCP and SACP to Tugboat Hulls. Dinamika Bahari, 7(2), 100-110. https://doi.org/10.46484/db.v7i2n.1818
Vancouver
Riswansyah A, Hariyanto S. A Comparative Technical and Economic Study of the Application of ICCP and SACP to Tugboat Hulls. Dinamika Bahari. 2026;7(2):100-110. doi:10.46484/db.v7i2n.1818
BibTeX
@article{Riswansyah2026,
author = {Riswansyah, Andi and Hariyanto, Surya},
title = {A Comparative Technical and Economic Study of the Application of ICCP and SACP to Tugboat Hulls},
journal = {Dinamika Bahari},
year = {2026},
volume = {7},
number = {2},
pages = {100--110},
doi = {10.46484/db.v7i2n.1818}
}
EUVIMED