EUVIMEDEUVIMED entdecken
Crossref

Investigation of Deep Drawability of Rectangular Shaped Cups in Deep Drawing Dies

Cebeli OZEK, Hayrettin AKKELEK

International Journal of Innovative Engineering Applications · 2021

DOI: 10.46460/ijiea.1006144 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Innovative Engineering Applications, 2021. Verfasst von Cebeli OZEK und 1 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 20 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Deep drawing is the process of obtaining three-dimensional containers of certain depths and shapes under pressing forces with the help of drawing molds of sheet materials. In this study, the numerical shaping of rectangular cups in angled deep drawing dies was investigated experimentally and by using the finite element method (FEM). For this purpose, die/blank holder surfaces have α=0°, α=3°, α=6°, α=9°, α=12° and α=15° angles in order to facilitate material flow into the die cavity. The punch and die corner radii are taken as 8 mm. St37 steel sheet with a thickness of 0,9 mm was used as the test material. The experiments were carried out by applying die/blank holder forces of 2500 N, 5000 N, 7500 N and 10000 N. The effects of angles and die/blank holder force on limit draw ratio, wall thickness and the damage of cups were investigated experimentally and numerically, and optimum punch force was determined. Obtained experimental results were compared with ANSYS results. As a result, it has been determined that the increase in die/blank holder surface angles in drawing dies with rectangular geometry with different angles provides a higher limit drawing rate than conventional dies. It has been seen that the experimental results and numerical results are approximate values.

Zitieren

APA

OZEK, C., & AKKELEK, H. (2021). Investigation of Deep Drawability of Rectangular Shaped Cups in Deep Drawing Dies. International Journal of Innovative Engineering Applications. https://doi.org/10.46460/ijiea.1006144

Vancouver

OZEK C, AKKELEK H. Investigation of Deep Drawability of Rectangular Shaped Cups in Deep Drawing Dies. International Journal of Innovative Engineering Applications. 2021. doi:10.46460/ijiea.1006144

BibTeX
@article{OZEK2021,
  author = {OZEK, Cebeli and AKKELEK, Hayrettin},
  title = {Investigation of Deep Drawability of Rectangular Shaped Cups in Deep Drawing Dies},
  journal = {International Journal of Innovative Engineering Applications},
  year = {2021},
  doi = {10.46460/ijiea.1006144}
}
Kostenlos starten →