EUVIMEDEUVIMED entdecken
Scoping Review

Applicability of the reverse scan body technique for the fabrication of implant-supported prostheses: a scoping review

Camila Nogueira CHAMMA-WEDEMANN, Renato Sartori Lardin SANCHEZ, Pedro Silva PACHECO, Marcio Katsuyoshi MUKAI, Newton SESMA, Emily Vivianne Freitas da SILVA

Brazilian Dental Science · 2026 · 29 · e4974

DOI: 10.4322/bds.2026.e4974 ↗

Kurz gefasst

Scoping Review in der Zeitschrift Brazilian Dental Science, 2026. Verfasst von Camila Nogueira CHAMMA-WEDEMANN und 5 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Scanning edentulous regions rehabilitated with implants presents significant challenges and necessitates innovative solutions. The development of the reverse scan body technique (RST) has enabled scanning to be performed outside the oral environment.

Objective

This scoping review examined the RST, critically evaluating the findings in the literature regarding its advantages and disadvantages in terms of working time and patient comfort, passive fit of prostheses on abutments, precision and accuracy of the RST. Material and Methods: Following the PRISMA protocol, the search was conducted until July 2025 (MEDLINE/PubMed, EMBASE, Web of Science) by two independent reviewers (RSLS,PSP) and one expert (CNCW). Objective data were analyzed without random-effects meta-analysis.

Results

Four in vitro studies and eight technical reports were included in the analysis (kappa = 0.875). A trend has been observed favoring this technique in full arches to replicate the dimensions of the provisional prosthesis, soft tissue information, and verification jig device, with reported advantages in terms of patient comfort and working time. RST performed with the E4 RED scanner demonstrated superior measurements of trueness (65 ± 43 µm) and precision (18 ± 11 µm) compared to those of IOS. The Procrustes distance values recorded for RST intraoral (median 9.5 µm) exhibited a significant difference when compared to the Control group (median 0.3 µm). Owing to the paucity of evidence regarding the RST as the primary focus, additional research is necessary to obtain robust data.

Conclusion

The potential applicability of the RST for the fabrication of implant-supported prostheses appears promising.

Zitieren

APA

CHAMMA-WEDEMANN, C. N., SANCHEZ, R. S. L., PACHECO, P. S., MUKAI, M. K., SESMA, N., & SILVA, E. V. F. D. (2026). Applicability of the reverse scan body technique for the fabrication of implant-supported prostheses: a scoping review. Brazilian Dental Science, 29, e4974. https://doi.org/10.4322/bds.2026.e4974

Vancouver

CHAMMA-WEDEMANN CN, SANCHEZ RSL, PACHECO PS, MUKAI MK, SESMA N, SILVA EVFD. Applicability of the reverse scan body technique for the fabrication of implant-supported prostheses: a scoping review. Brazilian Dental Science. 2026;29:e4974. doi:10.4322/bds.2026.e4974

BibTeX
@article{CHAMMAWEDEMANN2026,
  author = {CHAMMA-WEDEMANN, Camila Nogueira and SANCHEZ, Renato Sartori Lardin and PACHECO, Pedro Silva and MUKAI, Marcio Katsuyoshi and SESMA, Newton and SILVA, Emily Vivianne Freitas da},
  title = {Applicability of the reverse scan body technique for the fabrication of implant-supported prostheses: a scoping review},
  journal = {Brazilian Dental Science},
  year = {2026},
  volume = {29},
  pages = {e4974},
  doi = {10.4322/bds.2026.e4974}
}
Kostenlos starten →