Particle Size and Plasticity Characteristics of Ball Clays in Parts of Ahoada East, Abua Odua Local Government Area of Rivers State, Nigeria
Scientia Africana · 30.03.2026 · 25 (1) · 193-204
DOI: 10.4314/sa.v25i1.15 ↗Kurz gefasst
Fachartikel in der Zeitschrift Scientia Africana, online erschienen am 30.03.2026. Verfasst von T. C. Ukaegbu und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
Fine grained sedimentary soils called Ball clays were analysed in Abua Odua, local government of Rivers State to determine their suitability for industrial purposes. Representative soil samples were retrieved from three borings in three different locations namely: Odaga-(BH1), Otari-(BH2) and Oghora-(BH3) at regular intervals of 0.5m using a hand auger from the ground surface to a maximum depth of 5m, except where there was a change in lithology. The soil samples were subjected to various tests including moisture content, atterberg limits and particle size distribution in the Laboratory. Low to intermediate plasticity clays were recorded in BH1(Odaga) and BH2 (Otari) showing that the clays have a good cohesion, low to moderate swelling ability and fine texture that enhances the ability to mould and drying strength in ceramics. The clay soils in BH3(Oghora) have high plasticity values exhibiting poor moulding characteristics because of the low permeability, high water retention and swelling ability of the soils. Particle size distribution analysis recorded a high percentage of silt (66.1% and 50.4%) in BH1(Odaga) and BH2 (Otari) respectively, while a low percentage of silt (34.5%) was recorded in BH3 Oghora with an increasing coarsening sand fraction with depths. The results confirms that the ball clays in BH2 (Odaga) and BH3 (Otari) possess grain size characteristics suitable for industrial use as ceramic and in tile production. This is consistent with the expected properties of high-quality ball clays. Whereas clay soils in BH3 (Oghora) will require longer drying times, due to their high moisture content and plasticity percentages in order to make them suitable for industrial application.
Zitieren
APA
Ukaegbu, T. C., Ehibor, I. U., & Igbani, V. S. (2026). Particle Size and Plasticity Characteristics of Ball Clays in Parts of Ahoada East, Abua Odua Local Government Area of Rivers State, Nigeria. Scientia Africana, 25(1), 193-204. https://doi.org/10.4314/sa.v25i1.15
Vancouver
Ukaegbu TC, Ehibor IU, Igbani VS. Particle Size and Plasticity Characteristics of Ball Clays in Parts of Ahoada East, Abua Odua Local Government Area of Rivers State, Nigeria. Scientia Africana. 2026;25(1):193-204. doi:10.4314/sa.v25i1.15
BibTeX
@article{Ukaegbu2026,
author = {Ukaegbu, T. C. and Ehibor, I. U. and Igbani, V. S.},
title = {Particle Size and Plasticity Characteristics of Ball Clays in Parts of Ahoada East, Abua Odua Local Government Area of Rivers State, Nigeria},
journal = {Scientia Africana},
year = {2026},
volume = {25},
number = {1},
pages = {193--204},
doi = {10.4314/sa.v25i1.15}
}
EUVIMED