EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

VALORIZATION OF GRANITE QUARRY DUST AS MINERAL FILLER IN PORTLAND CEMENT: MECHANICAL PERFORMANCE AND DURABILITY ASSESSMENT

Delali Adjei

Journal of Science and Technology (Ghana) · 24.06.2026 · 44 (2) · 49

DOI: 10.4314/just.v44i2.18s ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Science and Technology (Ghana), online erschienen am 24.06.2026. Verfasst von Delali Adjei. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Granite dust, a fine-grained by-product of quarry processing operations, is generated in large volumes with limited reuse pathways, contributing to land degradation and disposal pressures in resource- extraction regions. This study evaluates its potential as a partial fine aggregate replacement in Portland cement mortar, targeting both performance optimization and industrial waste reduction. Granite dust sourced from a commercial quarry processing plant was characterized by X-ray fluorescence (XRF) and X-ray diffraction (XRD), revealing a silica-dominated composition (SiO2 = 71.22%, Al2O3 = 19.84%, Fe2O3 = 2.75%) with quartz, feldspar, and mica as the principal phases. Mortar mixes were designed at a water-cement ratio of 0.5, with granite dust replacing fine aggregates at 0%, 5%, 10%, 15%, 20% and 25% by weight. Fresh properties, compressive strength at 3, 7 and 28 days, alkali-silica reactivity (ASTM C1260), sodium sulphate soundness (ASTM C88), and resistance to sulphuric acid and sodium chloride exposure were assessed. Compressive strength peaked at 10% replacement (41.6 MPa vs. 38.9 MPa for the control; approximately 7% increase), attributable to enhanced particle packing density. Beyond 10%, strength declined progressively, though mixes up to 15% replacement retained superior durability under aggressive chemical exposure relative to the control. ASR expansion values remained below the ASTM C1260 threshold of 0.10% across all mixes, and soundness losses satisfied ASTM C88 limits. These results establish 10–15% granite dust replacement as a technically viable and sustainable substitution range, offering a scalable strategy for quarry waste valorization without compromising structural concrete performance.

Zitieren

APA

Adjei, D. (2026). VALORIZATION OF GRANITE QUARRY DUST AS MINERAL FILLER IN PORTLAND CEMENT: MECHANICAL PERFORMANCE AND DURABILITY ASSESSMENT. Journal of Science and Technology (Ghana), 44(2), 49. https://doi.org/10.4314/just.v44i2.18s

Vancouver

Adjei D. VALORIZATION OF GRANITE QUARRY DUST AS MINERAL FILLER IN PORTLAND CEMENT: MECHANICAL PERFORMANCE AND DURABILITY ASSESSMENT. Journal of Science and Technology (Ghana). 2026;44(2):49. doi:10.4314/just.v44i2.18s

BibTeX
@article{Adjei2026,
  author = {Adjei, Delali},
  title = {VALORIZATION OF GRANITE QUARRY DUST AS MINERAL FILLER IN PORTLAND CEMENT: MECHANICAL PERFORMANCE AND DURABILITY ASSESSMENT},
  journal = {Journal of Science and Technology (Ghana)},
  year = {2026},
  volume = {44},
  number = {2},
  pages = {49},
  doi = {10.4314/just.v44i2.18s}
}
Kostenlos starten →