EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Initial Wetting on Oil Recovery Via Surface Complexation Modelling

Elorm Amevor, Samuel Erzuah, Caspar Daniel Adenutsi, William Ampomah

Journal of Science and Technology (Ghana) · 24.04.2026 · 1 (2) · 36-47

DOI: 10.4314/just.v1i2.3s ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Science and Technology (Ghana), online erschienen am 24.04.2026. Verfasst von Elorm Amevor und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Wettability is the tendency of a fluid to adhere to a solid surface in the presence of other immiscible fluids. For multiphase flow in the reservoir, wettability affects the distribution of fluids and the flow properties in the reservoir. It has been reported that the fluid with the highest affinity towards the rock surface usually occupies the smaller pore spaces close to the pore walls. Conversely, the fluid with less affinity to the rock surface usually fills the bigger pore channels. It has been reported in the literature that, altering the wetting preferences has a profound consequence on oil production efficiency. For instance, water-wet reservoir rocks have higher oil recovery efficiency, unlike oil-wet ones. This paper focuses on predicting the effect of brine chemistry on initial wetting from a geochemical modeling point of view. A geochemical modeling simulator (PHREEQ-C) was employed to predict rock-fluid systems as reported in the literature. Brines with varying salinities were considered to calibrate the developed model. It was observed that Potential Determining Ions (PDI) increases the adsorption of polar oil components onto the mineral sites leading to a more hydrophobic state. The oil adsorption mechanism was observed to be divalent cation bridging. Hence, decreasing the divalent cations in the brine increases the repulsive force existing between the rock-brine and oil-brine interfaces thereby increasing the oil recovery. To add to the above, direct adsorption of carboxylate (>COO-) also took place. It was observed that the mineralogy of the rock, the chemistry of Formation Water (FW) and the properties of the Stock Tank Oil (STO) affect initial wettability and potential oil recovery efficiency.

Zitieren

APA

Amevor, E., Erzuah, S., Adenutsi, C. D., & Ampomah, W. (2026). Effect of Initial Wetting on Oil Recovery Via Surface Complexation Modelling. Journal of Science and Technology (Ghana), 1(2), 36-47. https://doi.org/10.4314/just.v1i2.3s

Vancouver

Amevor E, Erzuah S, Adenutsi CD, Ampomah W. Effect of Initial Wetting on Oil Recovery Via Surface Complexation Modelling. Journal of Science and Technology (Ghana). 2026;1(2):36-47. doi:10.4314/just.v1i2.3s

BibTeX
@article{Amevor2026,
  author = {Amevor, Elorm and Erzuah, Samuel and Adenutsi, Caspar Daniel and Ampomah, William},
  title = {Effect of Initial Wetting on Oil Recovery Via Surface Complexation Modelling},
  journal = {Journal of Science and Technology (Ghana)},
  year = {2026},
  volume = {1},
  number = {2},
  pages = {36--47},
  doi = {10.4314/just.v1i2.3s}
}
Kostenlos starten →