Thickness-Dependent Optimization of CuI Hole Transport Layer in CsPbI₂Br Indoor Perovskite Solar Cells: A SCAPS-1D Study
Journal of Chemical Society of Nigeria · 2026 · 51 (4) · 986-999
DOI: 10.4314/jcsn.v51i4.18 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Chemical Society of Nigeria, 2026. Verfasst von E E Igbokwe, und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).
Abstract (Originalsprache)
The growing deployment of low-power Internet of Things (IoT) devices has intensified the need for sustainable indoor-energy harvesting technologies. In this context, indoor photovoltaics (IPVs) based on wide-bandgap perovskite materials have emerged as promising candidates due to their spectral compatibility with artificial light sources. In this work, a lead-free CsPbI₂Br perovskite solar cell is investigated using SCAPS-1D under a realistic 5700 K white LED spectrum at an intensity of 1.20 mW cm⁻² (1000 lux). Particular attention is given to the influence of the CuI hole transport layer (HTL) thickness on device performance. The HTL thickness is systematically varied from 0.2 μm to 0.04 μm to evaluate its role under low-injection indoor conditions. The simulation results indicate that reducing the HTL thickness leads to a slight improvement in fill factor and overall efficiency, primarily due to reduced series resistance, while the open-circuit voltage and short-circuit current density remain largely unaffected. A maximum simulated power conversion efficiency of 34.56% is obtained under idealized conditions, representing an upper theoretical limit rather than an experimentally validated performance. For indoor solar panels, energy band alignment is more important than bulk transport properties, meaning transport layers can be made thinner to save costs without sacrificing performance.
Zitieren
APA
Igbokwe,, E. E., Nwaokorongwu, E. C., & Okpechi-Kanayochukwu, U. P. (2026). Thickness-Dependent Optimization of CuI Hole Transport Layer in CsPbI₂Br Indoor Perovskite Solar Cells: A SCAPS-1D Study. Journal of Chemical Society of Nigeria, 51(4), 986-999. https://doi.org/10.4314/jcsn.v51i4.18
Vancouver
Igbokwe, EE, Nwaokorongwu EC, Okpechi-Kanayochukwu UP. Thickness-Dependent Optimization of CuI Hole Transport Layer in CsPbI₂Br Indoor Perovskite Solar Cells: A SCAPS-1D Study. Journal of Chemical Society of Nigeria. 2026;51(4):986-999. doi:10.4314/jcsn.v51i4.18
BibTeX
@article{Igbokwe2026,
author = {Igbokwe,, E E and Nwaokorongwu, E C and Okpechi-Kanayochukwu, U P},
title = {Thickness-Dependent Optimization of CuI Hole Transport Layer in CsPbI₂Br Indoor Perovskite Solar Cells: A SCAPS-1D Study},
journal = {Journal of Chemical Society of Nigeria},
year = {2026},
volume = {51},
number = {4},
pages = {986--999},
doi = {10.4314/jcsn.v51i4.18}
}
EUVIMED