An experimental study on effect of process parameters in deep drawing using Taguchi technique
International Journal of Engineering, Science and Technology · 01.01.1970 · 7 (1) · 21-32
DOI: 10.4314/ijest.v7i1.3 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Engineering, Science and Technology, online erschienen am 01.01.1970. Verfasst von A. C. S. Reddy und 4 weiteren Autor:innen. Die Arbeit wurde bisher 34-mal zitiert (Crossref).
Abstract (Originalsprache)
The effects of various deep drawing process parameters were determined by experimental study with the use of Taguchi fractional factorial design and analysis of variance for AA6111 Aluminum alloy. The optimum process parameters were determined based on their influence on the thickness variation at different regions of the blank material. Three important process parameters i.e., punch nose radius, die shoulder radius and blankholder force were investigated in this study. Plan of experiments based on Taguchi’s technique were used for acquiring the data. An orthogonal array, the signal to noise ratio and the analysis of variance were employed to investigate the deep drawability characteristics. Influence on thickness due to variation of these parameters was individually evaluated in terms of percentage. The results showed that the blankholder force (56.98%) was the most significant parameter followed by punch nose radius (30.12%) and the least influence (12.90%) was with die profile radius.Keywords: Axisymmetric deep drawing, Taguchi method, orthogonal array, S/N ratio, anova
Zitieren
APA
Reddy, A. C. S., Rajesham, S., Reddy, P. R., Kumar, T. P., & Goverdhan, J. (1970). An experimental study on effect of process parameters in deep drawing using Taguchi technique. International Journal of Engineering, Science and Technology, 7(1), 21-32. https://doi.org/10.4314/ijest.v7i1.3
Vancouver
Reddy ACS, Rajesham S, Reddy PR, Kumar TP, Goverdhan J. An experimental study on effect of process parameters in deep drawing using Taguchi technique. International Journal of Engineering, Science and Technology. 1970;7(1):21-32. doi:10.4314/ijest.v7i1.3
BibTeX
@article{Reddy1970,
author = {Reddy, A. C. S. and Rajesham, S. and Reddy, P. R. and Kumar, T. P. and Goverdhan, J.},
title = {An experimental study on effect of process parameters in deep drawing using Taguchi technique},
journal = {International Journal of Engineering, Science and Technology},
year = {1970},
volume = {7},
number = {1},
pages = {21--32},
doi = {10.4314/ijest.v7i1.3}
}
EUVIMED