EUVIMEDEUVIMED entdecken
Crossref

Optimisation of machining parameters on milling of GFRP composites by desirability function analysis using Taguchi method

M.P. Jenarthanan, R Jeyapaul

International Journal of Engineering, Science and Technology · 29.03.2018 · 5 (4) · 22-36

DOI: 10.4314/ijest.v5i4.3 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Engineering, Science and Technology, online erschienen am 29.03.2018. Verfasst von M.P. Jenarthanan und 1 weiteren Autor:innen. Die Arbeit wurde bisher 52-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Milling of GFRP composite materials is a rather complex task owing to its heterogeneity and the number of problems, such as surface delamination, which appear during the machining process, associated with the characteristics of the material and the cutting parameters. Optimization of machining parameters is an important step in machining. This paper presents a new approach for optimizing the machining parameters on milling glass-fibre reinforced plastic (GFRP) composites. Optimization of machining parameters was done by an analysis called desirability function analysis (DFA), which is a useful tool for optimizing multi-response problems. In this work, based on Taguchi’s L27 orthogonal array, milling experiments were conducted for GFRP composite plates using solid carbide end mills with different helix angles. The machining parameters such as, spindle speed, feed rate, helix angle and fibre orientation angle are optimized by multi-response considerations namely surface roughness, delamination factor and machining force. A composite desirability value is obtained for the multi-responses using individual desirability values from the desirability function analysis. Based on composite desirability value, the optimum levels of parameters have been identified, and significant contribution of parameters is determined by analysis of variance.Keywords: GFRP composites; Taguchi; Desirability function analysis; ANOVA; Solid carbide end mill

Zitieren

APA

Jenarthanan, M., & Jeyapaul, R. (2018). Optimisation of machining parameters on milling of GFRP composites by desirability function analysis using Taguchi method. International Journal of Engineering, Science and Technology, 5(4), 22-36. https://doi.org/10.4314/ijest.v5i4.3

Vancouver

Jenarthanan M, Jeyapaul R. Optimisation of machining parameters on milling of GFRP composites by desirability function analysis using Taguchi method. International Journal of Engineering, Science and Technology. 2018;5(4):22-36. doi:10.4314/ijest.v5i4.3

BibTeX
@article{Jenarthanan2018,
  author = {Jenarthanan, M.P. and Jeyapaul, R},
  title = {Optimisation of machining parameters on milling of GFRP composites by desirability function analysis using Taguchi method},
  journal = {International Journal of Engineering, Science and Technology},
  year = {2018},
  volume = {5},
  number = {4},
  pages = {22--36},
  doi = {10.4314/ijest.v5i4.3}
}
Kostenlos starten →