Review of the Silicon Oxide and Polysilicon Layer as the Passivated Contacts for TOPCon Solar Cells
Journal of Korean Institute of Electrical and Electronic Materials Engineers · 01.05.2023 · 36 (3) · 233-240
DOI: 10.4313/jkem.2023.36.3.4 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Korean Institute of Electrical and Electronic Materials Engineers, erschienen am 01.05.2023. Verfasst von Mengmeng Chu und 7 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
p-type Tunnel Oxide Passivating Contacts (TOPCon) solar cell is fabricated with a poly-Si/SiOx structure. It simultaneously achieves surface passivation and enhances the carriers’ selective collection, which is a promising technology for conventional solar cells. The quality of passivation is depended on the quality of the tunnel oxide layer at the interface with the c-Si wafer, which is affected by the bond of SiO formed during the subsequent annealing process. The highest cell efficiency reported to date for the laboratory scale has increased to 26.1%, fabricated by the Institute for Solar Energy Research. The cells used a p-type float zone silicon with an interdigitated back contact (IBC) structure that fabricates poly-Si and SiOx layer achieves the highest implied open-circuit voltage (iVoc) is 750 mV, and the highest level of edge passivation is 40%. This review presents an overview of p-type TOPCon technologies, including the ultra-thin silicon oxide layer (SiOx) and poly-silicon layer (poly-Si), as well as the advancement of the SiOx and poly-Si layers. Subsequently, the limitations of improving efficiency are discussed in detail. Consequently, it is expected to provide a basis for the simplification of industrial mass production.
Zitieren
APA
Chu, M., Khokhar, M. Q., Yousuf, H., Fan, X., Han, S., Kim, Y., Dhungel, S. K., & Yi, J. (2023). Review of the Silicon Oxide and Polysilicon Layer as the Passivated Contacts for TOPCon Solar Cells. Journal of Korean Institute of Electrical and Electronic Materials Engineers, 36(3), 233-240. https://doi.org/10.4313/jkem.2023.36.3.4
Vancouver
Chu M, Khokhar MQ, Yousuf H, Fan X, Han S, Kim Y, et al. Review of the Silicon Oxide and Polysilicon Layer as the Passivated Contacts for TOPCon Solar Cells. Journal of Korean Institute of Electrical and Electronic Materials Engineers. 2023;36(3):233-240. doi:10.4313/jkem.2023.36.3.4
BibTeX
@article{Chu2023,
author = {Chu, Mengmeng and Khokhar, Muhammad Quddamah and Yousuf, Hasnain and Fan, Xinyi and Han, Seungyong and Kim, Youngkuk and Dhungel, Suresh Kumar and Yi, Junsin},
title = {Review of the Silicon Oxide and Polysilicon Layer as the Passivated Contacts for TOPCon Solar Cells},
journal = {Journal of Korean Institute of Electrical and Electronic Materials Engineers},
year = {2023},
volume = {36},
number = {3},
pages = {233--240},
doi = {10.4313/jkem.2023.36.3.4}
}
EUVIMED