EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Module Characteristic Modeling in Terms of the Number of Divisions of Large-Area Solar Cells

Juhwi Kim, Jaehyeong Lee

Journal of Korean Institute of Electrical and Electronic Materials Engineers · 01.03.2023 · 36 (2) · 136-142

DOI: 10.4313/jkem.2023.36.2.5 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Korean Institute of Electrical and Electronic Materials Engineers, erschienen am 01.03.2023. Verfasst von Juhwi Kim und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the past, the efficiency of solar cells had been increased in order to increase the efficiency of solar modules. However, in recent years, in order to increase output in the solar industry and market, the competitiveness of solar cells based on large-area solar cells and multi-bus bar has been increasing. Multi-busbar solar module is a technology to reduce power loss by increasing the number and width of the front busbar of the solar cell and reducing the current value delivered by the busbar by half through half-cutting. In the case of the existing M2 (156.75×156.75 ㎟) solar cell, even with a half-cut, power loss could be sufficiently reduced, but as the area of the solar cell is enlarged to more than M6 (166×166 ㎟), the need for more divisions emerged. This affected not only solar cells but also inverters required for module array configuration. Therefore, in this study, the electrical characteristics of a large-area solar cell and after division were extracted using Griddler simulation. The output characteristics of the module were predicted by applying the solar cell parameters after division to PSPice, and a guideline for the large-area solar module design was presented according to the number of divisions of the large-area solar cell.

Zitieren

APA

Kim, J., & Lee, J. (2023). Module Characteristic Modeling in Terms of the Number of Divisions of Large-Area Solar Cells. Journal of Korean Institute of Electrical and Electronic Materials Engineers, 36(2), 136-142. https://doi.org/10.4313/jkem.2023.36.2.5

Vancouver

Kim J, Lee J. Module Characteristic Modeling in Terms of the Number of Divisions of Large-Area Solar Cells. Journal of Korean Institute of Electrical and Electronic Materials Engineers. 2023;36(2):136-142. doi:10.4313/jkem.2023.36.2.5

BibTeX
@article{Kim2023,
  author = {Kim, Juhwi and Lee, Jaehyeong},
  title = {Module Characteristic Modeling in Terms of the Number of Divisions of Large-Area Solar Cells},
  journal = {Journal of Korean Institute of Electrical and Electronic Materials Engineers},
  year = {2023},
  volume = {36},
  number = {2},
  pages = {136--142},
  doi = {10.4313/jkem.2023.36.2.5}
}
Kostenlos starten →