Effect of APS Dip-Coating Time on Interfacial Charge Transport in Dye-Sensitized Solar Cells
Journal of Electrical and Electronic Materials · 01.07.2026 · 39 (4) · 387-393
DOI: 10.4313/jeem.2026.39.4.8 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Electrical and Electronic Materials, erschienen am 01.07.2026. Verfasst von Jin Wook Lee und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
Dye-sensitized solar cells (DSSCs) suffer from efficiency limitations due to interfacial charge recombination at the TiO₂/dye/electrolyte interface. In this study, aminopropyltrimethoxysilane (APS) was introduced onto nanoporous TiO₂ photoelectrodes via a dip-coating process with controlled coating times to investigate the effect of silanization time on interfacial charge transport behavior. Unlike concentration-driven structural modification, this work focuses on the evolution of the APS-modified interface governed by reaction time. The DSSC with 30 min APS treatment exhibited the highest power conversion efficiency of 5.34%, representing a 19% enhancement compared to the untreated device (4.49%), mainly due to increased short-circuit current density and open-circuit voltage. However, prolonged coating times (2 h and 24 h) resulted in a significant decrease in photocurrent density, leading to reduced device performance despite partial improvement in recombination resistance. These results are attributed to the time-dependent evolution of the APS interfacial layer. At moderate coating time, APS provides effective surface functionalization, enhancing dye adsorption and suppressing interfacial recombination. In contrast, prolonged coating is expected to induce increased surface coverage and silane condensation, which can hinder electron injection and increase charge transport resistance. Therefore, the photovoltaic performance is governed by a trade-off between recombination suppression and charge injection efficiency, controlled by the silanization time. This study highlights the critical role of interfacial reaction kinetics in determining charge transport behavior and provides an effective strategy for optimizing DSSC performance through time-dependent interface engineering.
Zitieren
APA
Lee, J. W., Shin, M., Hong, B., & Kim, H. J. (2026). Effect of APS Dip-Coating Time on Interfacial Charge Transport in Dye-Sensitized Solar Cells. Journal of Electrical and Electronic Materials, 39(4), 387-393. https://doi.org/10.4313/jeem.2026.39.4.8
Vancouver
Lee JW, Shin M, Hong B, Kim HJ. Effect of APS Dip-Coating Time on Interfacial Charge Transport in Dye-Sensitized Solar Cells. Journal of Electrical and Electronic Materials. 2026;39(4):387-393. doi:10.4313/jeem.2026.39.4.8
BibTeX
@article{Lee2026,
author = {Lee, Jin Wook and Shin, Minjae and Hong, Byungyou and Kim, Hyung Jin},
title = {Effect of APS Dip-Coating Time on Interfacial Charge Transport in Dye-Sensitized Solar Cells},
journal = {Journal of Electrical and Electronic Materials},
year = {2026},
volume = {39},
number = {4},
pages = {387--393},
doi = {10.4313/jeem.2026.39.4.8}
}
EUVIMED