Sr1.95Fe1.35Ni0.15Mo0.5O6-δ Perovskite Oxide as Anode Material for Direct Linz-Donawitz Converter Gas Fueled Solid Oxide Fuel Cells
Journal of Electrical and Electronic Materials · 01.07.2026 · 39 (4) · 364-373
DOI: 10.4313/jeem.2026.39.4.5 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Electrical and Electronic Materials, erschienen am 01.07.2026. Verfasst von Han-Bit Park und 1 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Commercialization Promotion Agency, Ministry of Science and ICT, Korea Institute of Energy Technology Evaluation and Planning.
Abstract (Originalsprache)
The direct utilization of steelmaking by-product gases in solid oxide fuel cells (SOFCs) offers a promising pathway to improve energy efficiency and reduce carbon emissions in the steel industry. In this study, a Sr-deficient and Ni-doped double perovskite oxide, Sr1.95Fe1.35Ni0.15Mo0.5O6-δ (SFNM), was investigated as an anode material for direct Linz-Donawitz converter gas (LDG)-fueled SOFCs. A single-phase double perovskite structure was successfully obtained after calcination at 1,200°C for 12 h, while exsolved metallic Ni nanoparticles were generated on the SFNM surface after reduction at 800°C. Electrochemical performance was evaluated using H2, simulated-LDG, and CO/CO2 (85:15) fuels at 800°C. The maximum power densities achieved were 1.23, 0.70, and 0.40 W cm-2 for H2, simulated-LDG, and CO/CO2 fuels, respectively. Although CO-containing fuels exhibited lower opencircuit voltages and power outputs than H2, the SFNM anode maintained stable operation and appreciable performance under direct simulated-LDG utilization. Impedance analysis revealed that the increased polarization resistance in simulated-LDG and CO/CO2 atmospheres was mainly associated with fuel adsorption/desorption and gas diffusion, while interfacial charge-transfer resistance remained relatively small. The superior performance obtained with simulated-LDG compared to the CO/CO2 mixture was attributed to the presence of a small amount of H2, which facilitated anode reaction kinetics. These results demonstrate that SFNM is a promising mixed ionic-electronic conductor anode for the direct electrochemical conversion of CO-rich steelmaking by-product gases into electricity.
Förderung
- Commercialization Promotion Agency
- Ministry of Science and ICT
- Korea Institute of Energy Technology Evaluation and Planning
- Ministry of Trade, Industry and Energy
- Jeonbuk RISE Center
- Ministry of Education
Zitieren
APA
Park, H., & Lee, K. (2026). Sr1.95Fe1.35Ni0.15Mo0.5O6-δ Perovskite Oxide as Anode Material for Direct Linz-Donawitz Converter Gas Fueled Solid Oxide Fuel Cells. Journal of Electrical and Electronic Materials, 39(4), 364-373. https://doi.org/10.4313/jeem.2026.39.4.5
Vancouver
Park H, Lee K. Sr1.95Fe1.35Ni0.15Mo0.5O6-δ Perovskite Oxide as Anode Material for Direct Linz-Donawitz Converter Gas Fueled Solid Oxide Fuel Cells. Journal of Electrical and Electronic Materials. 2026;39(4):364-373. doi:10.4313/jeem.2026.39.4.5
BibTeX
@article{Park2026,
author = {Park, Han-Bit and Lee, Ki-Tae},
title = {Sr1.95Fe1.35Ni0.15Mo0.5O6-δ Perovskite Oxide as Anode Material for Direct Linz-Donawitz Converter Gas Fueled Solid Oxide Fuel Cells},
journal = {Journal of Electrical and Electronic Materials},
year = {2026},
volume = {39},
number = {4},
pages = {364--373},
doi = {10.4313/jeem.2026.39.4.5}
}
EUVIMED