EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Solvent-Dependent Crystallization and Charge Transport Evolution in Thermally Annealed P3HT:PCBM Bulk Heterojunction Solar Cells

Dong-Kyun Kim, Byungyou Hong, Hyung Jin Kim

Journal of Electrical and Electronic Materials · 01.07.2026 · 39 (4) · 400-406

DOI: 10.4313/jeem.2026.39.4.10 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Electrical and Electronic Materials, erschienen am 01.07.2026. Verfasst von Dong-Kyun Kim und 2 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Ulsan RISE Center, Ministry of Education, Ulsan Metropolitan City.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Organic solar cells based on bulk heterojunction (BHJ) structures have attracted considerable attention because of their low fabrication cost, mechanical flexibility, and compatibility with solution-processing techniques. In BHJ organic photovoltaic devices, nanoscale morphology and crystallinity of the photoactive layer critically influence photovoltaic performance. In this study, the effects of solvent selection and thermal annealing on crystallization evolution and photovoltaic characteristics of P3HT:PCBM organic solar cells were systematically investigated. Three different solvents, including toluene, chlorobenzene (CB), and dichlorobenzene (DCB), were employed for active-layer fabrication, followed by post-thermal annealing treatment. UV–visible absorption spectroscopy revealed solvent-dependent differences in molecular ordering and intermolecular π–π interactions within the active layer. X-ray diffraction analysis confirmed that thermal annealing significantly enhanced crystallinity and lamellar ordering of P3HT domains, particularly for CB-processed films. Electrical characterization demonstrated that solvent evaporation behavior strongly affects photovoltaic performance. Among the investigated devices, the thermally annealed CB-processed device exhibited the highest power conversion efficiency of 1.83% with an enhanced short-circuit current density of 7.057 mA cm⁻². The improved device performance is attributed to optimized crystallization behavior and balanced nanoscale phase separation induced by the moderate evaporation characteristics of CB. In contrast, although DCB-assisted films exhibited relatively strong optical absorption and enhanced crystallinity, excessively slow solvent evaporation likely induced excessive aggregation and coarse phase separation, limiting efficient photovoltaic characteristics. These results demonstrate that solvent engineering combined with thermal annealing is an effective strategy for controlling morphology evolution and crystallization behavior in P3HT:PCBM bulk heterojunction solar cells.

Förderung

  • Ulsan RISE Center
  • Ministry of Education
  • Ulsan Metropolitan City

Zitieren

APA

Kim, D., Hong, B., & Kim, H. J. (2026). Solvent-Dependent Crystallization and Charge Transport Evolution in Thermally Annealed P3HT:PCBM Bulk Heterojunction Solar Cells. Journal of Electrical and Electronic Materials, 39(4), 400-406. https://doi.org/10.4313/jeem.2026.39.4.10

Vancouver

Kim D, Hong B, Kim HJ. Solvent-Dependent Crystallization and Charge Transport Evolution in Thermally Annealed P3HT:PCBM Bulk Heterojunction Solar Cells. Journal of Electrical and Electronic Materials. 2026;39(4):400-406. doi:10.4313/jeem.2026.39.4.10

BibTeX
@article{Kim2026,
  author = {Kim, Dong-Kyun and Hong, Byungyou and Kim, Hyung Jin},
  title = {Solvent-Dependent Crystallization and Charge Transport Evolution in Thermally Annealed P3HT:PCBM Bulk Heterojunction Solar Cells},
  journal = {Journal of Electrical and Electronic Materials},
  year = {2026},
  volume = {39},
  number = {4},
  pages = {400--406},
  doi = {10.4313/jeem.2026.39.4.10}
}
Kostenlos starten →