EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

A Lighting Control Method for Reducing Luminance Deviation in AC-LED Lighting Systems

Dong Won Lee, Byungcheul Kim

Journal of Electrical and Electronic Materials · 01.03.2026 · 39 (2) · 193-197

DOI: 10.4313/jeem.2026.39.2.8 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Electrical and Electronic Materials, erschienen am 01.03.2026. Verfasst von Dong Won Lee und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Long lifetime, low power consumption, and environmental friendliness have enabled light-emitting diode (LED) lighting to rapidly replace conventional light sources such as incandescent and fluorescent lamps. In particular, AC-LED lighting systems can be directly powered by commercial alternating current (AC) sources; however, they suffer from significant luminance deviation caused by uneven current distribution among LED light-emitting modules. This paper proposes a lighting control method that improves flicker performance while maintaining lamp brightness and effectively reduces luminance deviation in AC-LED lighting. The proposed method reduces luminance deviation by controlling the lighting order of multiple LED light-emitting modules. Among four LED modules, only the required number of modules is continuously turned on, and the lighting priority alternates between rectification cycles. Specifically, during odd rectification cycles, LED modules are activated sequentially in ascending order (11→12→13→14), whereas during even rectification cycles, they are activated in descending order (14→13→12→11). By alternately applying continuous lighting control with opposite activation orders, the proposed reverse alternating lighting control method equalizes the current distribution among LED modules. As a result, luminance uniformity is improved, electrical stress concentration on specific modules is reduced, and the operational lifetime of the LED modules is extended compared with the conventional fixed-sequence lighting control method.

Zitieren

APA

Lee, D. W., & Kim, B. (2026). A Lighting Control Method for Reducing Luminance Deviation in AC-LED Lighting Systems. Journal of Electrical and Electronic Materials, 39(2), 193-197. https://doi.org/10.4313/jeem.2026.39.2.8

Vancouver

Lee DW, Kim B. A Lighting Control Method for Reducing Luminance Deviation in AC-LED Lighting Systems. Journal of Electrical and Electronic Materials. 2026;39(2):193-197. doi:10.4313/jeem.2026.39.2.8

BibTeX
@article{Lee2026,
  author = {Lee, Dong Won and Kim, Byungcheul},
  title = {A Lighting Control Method for Reducing Luminance Deviation in AC-LED Lighting Systems},
  journal = {Journal of Electrical and Electronic Materials},
  year = {2026},
  volume = {39},
  number = {2},
  pages = {193--197},
  doi = {10.4313/jeem.2026.39.2.8}
}
Kostenlos starten →