Electrical Properties Based on Dielectric Layer Thickness for the Optimal Design of BaTiO3-Based X8R MLCCs
Journal of Electrical and Electronic Materials · 01.03.2026 · 39 (2) · 175-182
DOI: 10.4313/jeem.2026.39.2.6 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Electrical and Electronic Materials, erschienen am 01.03.2026. Verfasst von Change-ho Lee und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
This study investigates the effect of dielectric layer thickness on the electrical and reliability characteristics of BaTiO₃- based X8R multilayer ceramic capacitors (MLCCs) for automotive applications. MLCCs with 30 dielectric layers and thicknesses ranging from 5 to 30 μm were fabricated, and key parameters―including capacitance, equivalent series resistance (ESR), insulation resistance (IR), breakdown voltage (BDV), DC-bias characteristics, temperature coefficient of capacitance (TCC), and ripple current-induced heating―were evaluated. The dielectric constant (~2,000) and sintering shrinkage (~-25%) were nearly independent of thickness, confirming stable microstructure formation. ESR increased with thickness, while normalized BDV (V/μm) decreased due to defect accumulation. IR improved with increasing thickness but dropped sharply above 125℃. Dielectrics thinner than 10 μm exhibited significant capacitance degradation under DC-bias and temperature variation, reflecting strong internal field effects. Ripple-induced heating correlated directly with ESR. These results indicate that, although thinner layers enhance capacitance density, reducing the thickness below 10 μm compromises bias stability and thermal reliability. A minimum dielectric thickness of 10 μm is therefore recommended to achieve an optimal balance between electrical performance and durability in high-reliability X8R MLCCs.
Zitieren
APA
Lee, C., Lee, J. K., & Yoon, J. R. (2026). Electrical Properties Based on Dielectric Layer Thickness for the Optimal Design of BaTiO3-Based X8R MLCCs. Journal of Electrical and Electronic Materials, 39(2), 175-182. https://doi.org/10.4313/jeem.2026.39.2.6
Vancouver
Lee C, Lee JK, Yoon JR. Electrical Properties Based on Dielectric Layer Thickness for the Optimal Design of BaTiO3-Based X8R MLCCs. Journal of Electrical and Electronic Materials. 2026;39(2):175-182. doi:10.4313/jeem.2026.39.2.6
BibTeX
@article{Lee2026,
author = {Lee, Change-ho and Lee, Jong Kyu and Yoon, Jung Rag},
title = {Electrical Properties Based on Dielectric Layer Thickness for the Optimal Design of BaTiO3-Based X8R MLCCs},
journal = {Journal of Electrical and Electronic Materials},
year = {2026},
volume = {39},
number = {2},
pages = {175--182},
doi = {10.4313/jeem.2026.39.2.6}
}
EUVIMED